Delayed Self-Clean
Use a 2 hour
!CAUTION
To avoid risk of personal injury, use care when opening the oven door after the
VERY HOT.
DO NOT force the oven door open. This can damage the automatic door locking system.
1.Confirm clock shows the correct time of day.
2.Press CLEAN pad.
•“CLN TIME” displays.
3.Press and hold or pad until “3 HR:00” displays.
•Set the cleaning time based on the amount of soil you
•When the controls are set, the motor driven lock begins to close automatically and the “LOCKED” indicator light will be displayed. (It takes about 15 seconds for the lock to close.)
•“Clean” light comes on. “Oven” light comes on and cycles with the oven burners.
4.Press STOP TIME pad.
•
•“CLN STOP TIME” display.
5.Press and hold or pad until the
•The control calculates backward from the set stop time to determine when the
•The
out and ““ O ”” appears.
N
To Stop or Interrupt a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a
1.Press OVEN CANCEL pad.
2.Once the oven has cooled for approximately
1 HOUR and “LOCKED” in the display has gone out, then the oven door can be opened.
•If the
When the Self-Clean Cycle is Completed
1.The time of day will appear in the display window and the word “LOCKED” remains in the display until oven cools.
2.Once the oven has cooled for approximately
1 HOUR and the word “LOCKED” shown in the display has gone out, then the oven door can be opened.
•DO NOT force the oven door open. This can damage the automatic door locking system. Use caution when opening the door after the self- cleaning cycle is completed. The oven may still be
VERY HOT.
15