Basic Functions
IMPORTANT:
Before you operate the system, complete the preparation procedures.
Switching the system on
●Press
➜ The system will switch to the last selected source.
Adjusting volume and sound
1Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to increase or decrease volume.
➜Display shows the volume level Uo and a number from
2Press DBB 1 or DBB 2 (DBB on the remote control) to switch bass enhancement on or off.
➜Display shows: 
or 
if the DBB is activated.
3 Press MUTE on the remote control to stop sound play- back instantly.
➜Playback will continue
without sound and the display
shows 
.
●To start sound playback you can:
–press MUTE again;
–adjust the volume controls;
–change source.
English
●Press SOURCE (CD, TUNER or TAPE on the remote control).
➜ The system will switch to the selected source.
To switch the system to standby mode
●Press
●If in tape mode or recording mode, press STOP•OPEN first.
➜ The volume level (up to maximum volume level of 20), interactive sound settings, last selected source and tuner presets will be retained in the player's memory.
Power-saving automatic standby
The
11