Philips MC150/21 manual Different play modes Shuffle and Repeat, Programming track numbers

Page 13

CD Operation

Different play modes: SHUFFLE and REPEAT

You can select and change the various play modes before or during playback.The play modes can also be combined with

PROGRAMME.

SHUFFLE ......... tracks of the entire disc/

programme are played in random order

SHUFFLE and REPEAT ALL…to repeat the entire disc/ programme continuously in random order

REPEAT ALL ... repeats the entire disc/ programme

REPEAT ............ plays the current track

continuously

1To select your play mode, press the SHUFFLE or REPEAT button before or during playback until the display shows the desired function.

2Press 2; to start playback if in the STOP position.

If you have selected SHUFFLE, playback starts automatically.

3To return to normal playback, press the respective SHUFFLE or REPEAT button until the various SHUFFLE/ REPEAT modes are no longer displayed.

Programming track numbers

Programme in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 20 tracks can be stored in the memory.

1Press PROGRAM (PROG on the remote control) to enter the programming mode.

Prog is shown and PROG flashes.

2Use the ¡1 or 2™ (¡ or ™ on remote control) to select your desired track number.

3Press PROGRAM (PROG on the remote control) to confirm the track number to be stored.

Next program number P-0Xis displayed.

4Repeat steps 2-3to select and store all desired tracks.

FULLis displayed if you attempt to programme more than 20 tracks.

5To start playback of your disc programme, press 2;.

Note:

– If you wish, you can add further tracks to your current program. Make sure you are in the STOP position, and that you have not exceeded 20 tracks.

English

You can also press 9 to cancel your play mode.

Reviewing the programme

In STOP mode, press and hold down PROGRAM (PROG on the remote control) for a while until the display shows all your stored track numbers in sequence.

Erasing the programme

You can erase the programme by:

pressing 9 once in the STOP mode; pressing 9 twice during playback; opening the CD compartment;

PROG disappears from the display.

13

Image 13
Contents Micro Hi-Fi System México Page Page Index Contents Safety Information Supplied accessoriesGeneral Information Environmental InformationPreparations Power Antennas ConnectionRear connections MW AntennaReplacing battery lithium CR2025 into the remote control Before using the remote controlSpeakers Connection FM AntennaControls on the system and remote control Adjusting volume and sound Switching the system onPower-saving automatic standby Basic FunctionsSelecting a different track CD OperationPlaying a disc Finding a passage within a trackProgramming track numbers Different play modes Shuffle and RepeatReviewing the programme Erasing the programmeRadio Reception All versions Changing tuning grid not available forTape playback Tape Operation / RecordingFull spool to the left Press Play 2 to start playback Recording from the radio MaintenanceSetting the clock Clock/TimerSetting the timer Viewing the clockSpecifications Problem Solution TroubleshootingTimer is not working Remote control does not functionClock/Timer setting is erased Properly