Philips MC150/21 manual Changing tuning grid not available for, All versions

Page 15

Changing tuning grid (not available for

all versions)

In North and South America, the frequency step between adjacent channels in the MW band is 10 kHz (9 kHz in some areas). The preset frequency step in the factory is 9 kHz.

Changing the tuning grid will erase all previously stored preset radio stations.

1Select TUNER source or in the tuner mode.

2Press STOP on the set for at least 5 seconds.

➜The display will show "" or

"".

Notes:

–GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 kHz and 10 kHz respectively.

–The FM tuning grid also will be changed from 50 kHz to 100 kHz or vice versa.

Radio Reception

English

Image 15

Contents Micro Hi-Fi System México Page Page Index Contents Environmental Information Supplied accessoriesSafety Information General InformationMW Antenna Power Antennas ConnectionPreparations Rear connectionsFM Antenna Before using the remote controlReplacing battery lithium CR2025 into the remote control Speakers ConnectionControls on the system and remote control Basic Functions Switching the system onAdjusting volume and sound Power-saving automatic standbyFinding a passage within a track CD OperationSelecting a different track Playing a discErasing the programme Different play modes Shuffle and RepeatProgramming track numbers Reviewing the programmeRadio Reception All versions Changing tuning grid not available forTape Operation / Recording Tape playbackFull spool to the left Press Play 2 to start playback Recording from the radio MaintenanceViewing the clock Clock/TimerSetting the clock Setting the timerSpecifications Problem Solution TroubleshootingProperly Remote control does not functionTimer is not working Clock/Timer setting is erased