Philips MC150/21 manual Clock/Timer, Setting the clock, Viewing the clock, Setting the timer

Page 18

Clock/Timer

English

Setting the clock

1Press and hold CLOCK button.

The clock digits for the hours flash.

2Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to set the hours.

3Press CLOCK again.

The clock digits for the minutes flash.

4Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to set the minutes.

5Press CLOCK to confirm the time.

Viewing the clock

To view the clock time in any source mode, press CLOCK, the clock time will be displayed for few seconds.

Note:

If the clock has not been set, --:-- will be displayed.

Setting the timer

The system can be used as an alarm clock. CD or TUNER can be set to switch on at a preset time.The clock time needs to be set first before the timer can be used.

If no button is pressed within 90 seconds during timer setup, the system will exit timer setting mode automatically.

1In any mode, press TIMER for more than 2 seconds.

2Press SOURCE (VOL 3 / 4 on the remote control) to select sound source.

3Press TIMER to confirm your desired source.

The selected source

CD or

 

is

 

shown. The clock digits for the hours flash.

4Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to set the hours.

5Press TIMER again.

The clock digits for the minutes flash.

6Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to set the minutes.

7Press TIMER to confirm the time.

The timer is now set and actiated.

Note:

-Timer will not start if recording is in progress

-If source CD is selected and no disc is in the CD tray or the disc has an error,TUNER will be selected automatically.

Activating and deactivating

TIMER

In standby or during playback, press TIMER once.

Display shows TIMER if activated, and disappears if deactivated.

18

Image 18
Contents Micro Hi-Fi System México Page Page Index Contents General Information Supplied accessoriesSafety Information Environmental InformationRear connections Power Antennas ConnectionPreparations MW AntennaSpeakers Connection Before using the remote controlReplacing battery lithium CR2025 into the remote control FM AntennaControls on the system and remote control Power-saving automatic standby Switching the system onAdjusting volume and sound Basic FunctionsPlaying a disc CD OperationSelecting a different track Finding a passage within a trackReviewing the programme Different play modes Shuffle and RepeatProgramming track numbers Erasing the programmeRadio Reception Changing tuning grid not available for All versionsTape Operation / Recording Tape playbackFull spool to the left Press Play 2 to start playback Maintenance Recording from the radioSetting the timer Clock/TimerSetting the clock Viewing the clockSpecifications Troubleshooting Problem SolutionClock/Timer setting is erased Remote control does not functionTimer is not working Properly