Denon AVR-3802 manual Setting UP the System, System Setup button, Cursor buttons, Enter button

7SETTING UP THE SYSTEM

•Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 13), make the various settings described below on the monitor screen using the AVR-3802’s on-screen display function.

These settings are required to set up the listening room’s AV system centered around the AVR-3802.

•Use the following buttons to set up the system:

DISPLAY		MENU
SURR.		OSD
PARA.
SETUP		RETURN
	TUNING	A/B
		MEMORY
BAND		MODE
CHANNEL		VOLUME
+	TUNING	+
SKIP	ENTER
-	SHIFT	-
SKIP	MUTING
TUNER	PHONO	CD

SYSTEM SETUP button

Press this to display the system setup menu.

CURSOR buttons

Fand G: Use these to move the cursors (F and G) to the left and right on the screen.

Dand H: Use these to move the cursors (D and H) to the up and down on the screen.

ENTER button

Press this to switch the display.

Also use this button to complete the setting.

•System setup items and default values (set upon shipment from the factory)

		System setup				Default settings
q	Power AMP	Set this to switch the surround back channel’s power amplifier for				Surround Back
	Assignment	use for multi-zone.
		Input the combination of speakers in your system and their		Front Sp.	Center Sp.	Surround Sp.	Surround Back Sp.		Sub Woofer
	Speaker	corresponding sizes (SMALL for regular speakers, LARGE for full-				A / B
	Configuration	size, full-range) to automatically set the composition of the signals		Large	Small	Small	Small / 2spkrs		Yes
		output from the speakers and the frequency response.
		Use this function when using multiple surround speaker	Surround	DOLBY/	5CH/7CH	DSP
								—	—
				DTS			EXT. IN
	Surround	combinations for more ideal surround sound. Once the	mode		STEREO	SIMULATION
				SURROUND
		combinations of surround speakers to be used for the
w SettingSpeaker
		different surround modes are preset, the surround	Surround
		speakers are selected automatically according to the		A	A	A	A	—	—
		surround mode.	speaker
	Crossover	Set the frequency (Hz) below which the bass sound of the various				80 Hz
	Frequency	speakers is to be output from the subwoofer.

Subwoofer mode

eSB CH Auto Flag Detect

rDelay Time

tChannelLevel

yDigital In Assignment

uMulti vol. Level

iOn Screen Display

This selects the subwoofer speaker for playing deep bass signals.

Set the method of playing the surround back channel for digital signals.

This parameter is for optimizing the timing with which the audio signals are produced from the speakers and subwoofer according to the listening position.

This adjusts the volume of the signals output from the speakers and subwoofer for the different channels in order to obtain optimum effects.

	Input
This assigns the digital input jacks for the different input	source
sources.	Digital
	Inputs
This sets the output level for the multi output jacks.

This sets whether or not to display the on-screen display that appears on the monitor screen when the controls on the remote control unit or main unit are operated.

					LFE
		DTS-ES / 6.1 Source Auto = OFF
Front L & R		Center		Surround L & R			SBL & SBR		Sub Woofer
12 ft (3.6 m)		12 ft (3.6 m)		10 ft (3.0 m)			10 ft (3.0 m)		12 ft (3.6 m)
Front L	Front R	Center		Surround		Surround	Surround	Surround	Subwoofer
				L		R	Back L	Back R
0 dB	0 dB	0 dB		0 dB		0 dB	0 dB	0 dB		0 dB
CD	DVD	TV/DBS	CDR/TAPE			VDP	VCR-1	VCR-2	—		—
COAXIAL	OPTICAL 1	OPTICAL 2	OPTICAL 3			OFF	OFF	OFF	—		—

0 dB

On Screen Display = ON

			A1 ~ A8		87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
			B1 ~B8		520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz
o	Auto Tuner	FM stations are received automatically and stored in the memory.	C1 ~C8		90.1 MHz
	Presets
			D1	~D8	90.1 MHz
			E1	~E8	90.1 MHz

16