Denon AVR-3802 manual Connecting video components

Page 7

Connecting video components

•To connect the video signal, connect using a 75 Ω /ohms video signal cable cord. Using an improper cable can result in a drop in video quality.

•When making connections, also refer to the operating instructions of the other components.

AUDIO VIDEO

OUT

R L OUT

R

L

TV or DBS tuner

B

Connecting a TV/DBS tuner

TV/DBS

•Connect the TV’s or DBS tuner’s video output jack (VIDEO OUTPUT) to the VIDEO (yellow) TV/DBS IN jack using a 75 Ω /ohms video coaxial pin plug

cord.

•Connect the TV’s or DBS tuner’s audio output jacks (AUDIO OUTPUT) to the AUDIO TV/DBS IN jacks using pin plug cords.

Monitor TV

VIDEO

IN

AUDIO

VIDEO

B

 

OUT

 

 

 

DVD player or video disc player (VDP), etc.

R

L OUT

R L

Connecting a DVD player or a video disc player (VDP)

DVD

•Connect the video disc player’s video output jack (VIDEO OUTPUT) to the VIDEO (yellow) DVD IN jack using a 75 Ω /ohms video coaxial pin plug cord.

•Connect the video disc player’s analog audio output jacks (ANALOG AUDIO OUTPUT) to the AUDIO DVD IN jacks using pin plug cords.

•A VDP can be connected to the VDP jacks in the same way.

•It is also possible to connect a video disc player, DVD player, video camcorder, game machine, etc., to the VCR-2/V.AUX jacks.

MONITOR OUT

•Connect the TV’s video input jack (VIDEO INPUT) to

the VIDEO MONITOR OUT jack using a 75

Ω/ohms video coaxial pin plug cord.

R

L

R

L

R

L

R

L

R

L

R L

Note on connecting the digital input jacks

•Only audio signals are input to the digital input jacks. For details, see page 6.

R

L

R

L

R

 

 

L

R

 

L OUT IN

 

OUT

 

IN

 

 

 

AUDIO

 

VIDEO

 

 

 

 

R

L

R

L

R

 

 

L

R

 

L OUT IN

 

OUT

 

IN

 

 

 

AUDIO

 

VIDEO

 

 

 

 

Video deck 2

Video deck 1

Connecting a video decks

•There are two sets of video deck (VCR) jacks, so two video decks can be connected for simultaneous recording or video copying.

Video input/output connections:

•Connect the video deck’s video output jack (VIDEO OUT) to the VIDEO (yellow) VCR-1 IN jack, and the video deck’s video input jack (VIDEO IN) to the

(yellow) VCR-1 OUT jack using 75 Ω /ohms video coaxial pin plug cords.

Connecting the audio output jacks

•Connect the video deck’s audio output jacks (AUDIO OUT) to the AUDIO VCR-1 IN jacks, and the video deck’s audio input jacks (AUDIO IN) to the AUDIO OUT jacks using pin plug cords.

Connect the second video deck to the VCR-2/V.AUX jacks in the same way.

VIDEO

VCR-1

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents AVR-3802 Safety Precautions Safety Instructions Before Using Table of ContentsFeatures Connections Connecting the audio componentsConnecting video components Connecting the video decks Connecting a video component equipped with S-Video jacksPrecaution when using S-jacks Connecting a monitor TVConnecting a monitor TV Monitor OUT jack Connecting a DVD player DVD in jacksAM loop antenna assembly FM antenna adapter assembly Connecting the antenna terminalsConnecting the Multi Zone jacks Connecting the external input EXT. in jacksConnections Connecting banana plugsPrecautions when connecting speakers Speaker system connectionsProtector circuit Surround Speaker A/B Part Names and Functions@9@8@7 Front PanelDISPLAY/SURR. Para Remote control unitCursor buttons Setting UP the SystemSystem Setup button Press this to display the system setup menuSB Surround Back Speaker Surround speaker selector functionSetting the power amplifier assignment Before setting up the systemSetting the type of speakers Parameters Select the setting Setting the Crossover Frequency and Subwoofer modeEnter the setting Select the Subwoofer ModeCrossover Frequency Assignment of low frequency signal rangeSubwoofer mode SettingPreparations Setting the delay timeSwitch to the Channel Level screen Select Test Tone Mode Setting the channel levelWhen the Manual mode is selected When the surround back speaker setting is set to 1spkr forSpeaker Configuration, this is set to SB Volume can be adjusted between -12 dB and +12 dB in unitsTo select the input source Setting the Digital In AssignmentTo select the digital input jack Variable Setting the multi vol. levelSetting the on-screen display OSD DB, -40 dBPress the Enter button Auto Preset Memory screen appears Auto tuner presetsOn-screen display signals After completing system setupUsing the remote control unit Remote Control UnitInserting the batteries Tuner system buttons Operating Denon audio componentsCD player CD system buttons Tape deck Tape system buttons MD recorder MD, CD recorder CDR system buttons2, 3 Operating a component stored in the preset memory Checking the preset memory settingsVideo deck VCR/VCR-2 system Monitor TV TV, digital Buttons Digital video disc player DVD, DVD Setup system buttonsVideo disc player VDP system ButtonsNot Valid Learning functionSystem call Storing system call signalsSYS Mode SYS Call 5, 65 2, 3, 4, 5 ResettingUsing the system call function Resetting the system call buttons5 2, 3, 4, 6 Reset PRE Reset LRNReset ALL Reset SYS Resetting the preset memory4, 5 Resetting learned buttons2, 3, 4 All reset functionAuto search function Refer to Connections pages 6 to 13 and check that all Select AMP using the Receiver buttonOnly when operating with the remote control unit Turn on the powerPlaying the input source Input mode selection functionExample CD Input signal display Input mode displayExample Stereo Mode Playback using the external input EXT. in jacksPress the EXT. in to switch External input Set the external input EXTTurning the sound off temporarily Muting Adjusting the sound quality ToneListening over headphones After starting playbackMulti-source recording/playback Playing one source while recording another REC OUT modeChecking the currently playing program source, etc Select Multi using Receiver button Display switches as follows eachWhen Source is selected, the Multi indicator turns This operation is not possible in the REC OUT modeMulti Zone Music Entertainment System Multi-zone playback with multi-sourceBefore playing with the surround function SurroundFader function 5 1, 4Center Width Control Surround parameters q Pro Logic II ModePanorama Mode Dimension ControlDetect LED Display the surround parameter menu Select the various parameters Adjust the parameter settingsDialogue Normalization DSP Surround Simulation Surround modes and their featuresPersonal Memory Plus Set the parameters DSP surround simulationPress the Surround Parameter button When turned clockwiseWhen turned counterclockwise 1,3Tone control setting Music CinemaSurround modes and parameters Tuner Auto tuningManual tuning Listening to the RadioChecking the preset stations Preset memoryLast Function Memory Recalling preset stationsInitialization of the Microprocessor Troubleshooting Movie theater sound field Types of multi-channel signalsAdditional Information Types of sources Movie audioNumber of surround back speakers Surround back speakersSpeaker setting examples When not using surround back speakers When using different surround speakers for movies and musicDolby Digital compatible media and playback methods SurroundDolby Surround Dolby Digital Dolby Surround AC-3 Dolby Digital and Dolby Pro LogicDTS compatible media and playback methods DTS Digital SurroundDTS Neo6 Cinema DTS-ESTMDiscreteDTS-ESTMMatrix DTS Neo6TM surroundSBL & SBR Surround modes and parameters Specifications 14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan

AVR-3802 specifications

The Denon AVR-3802 is a noteworthy feature-rich audio/video receiver that stands out in the realm of home theater systems. Released in the early 2000s, it continues to be appreciated by audiophiles and home cinema enthusiasts alike, thanks to its robust performance and advanced technologies.

One of the standout features of the AVR-3802 is its impressive power output. With a 110 watts per channel rating over 7 channels, it provides ample power to drive a variety of speakers, allowing users to create a dynamic home theater experience. This results in clear, powerful sound across a range of audio formats, from music to movies.

The AVR-3802 is equipped with a comprehensive array of inputs and outputs. It includes multiple analog and digital inputs, allowing for the connection of various audio sources such as CD players, DVD players, and gaming consoles. Additionally, the receiver supports up to seven channels of surround sound, making it compatible with numerous audio formats including Dolby Digital and DTS, which are crucial for cinematic sound experiences.

Another key feature is the incorporation of Denon's proprietary technologies, such as the "Advanced Surround Processing" which enhances the spatial audio experience. This feature helps in creating an immersive environment, utilizing different sound processing modes tailored for different content types, whether it's a concert, movie, or video game.

Denon has also ensured that the AVR-3802 displays excellent video performance. It offers multiple video inputs, including composite, S-video, and component video, facilitating high-quality video playback. The receiver supports up to 1080p video resolution, ensuring compatibility with high-definition displays. Additionally, it includes a built-in video upscaling feature that enhances lower resolution content to optimize the viewing experience.

The user interface on the AVR-3802 is designed with usability in mind. A large, easy-to-read display combined with intuitive remote control navigation simplifies the process of adjusting settings, programming presets, and switching between inputs.

In summary, the Denon AVR-3802 remains a solid choice for those seeking a high-performance audio/video receiver. With its robust power handling, versatile connectivity options, advanced surround sound processing, and high-definition video capabilities, it provides an excellent foundation for building a home entertainment system. Enthusiasts can enjoy rich, immersive audio experiences coupled with stunning video quality, making the AVR-3802 a lasting component in the world of home theaters.
Top Page Image Contents