Denon AVR-3802 manual After starting playback, Adjusting the sound quality Tone

Page 45

After starting playback

[1] Adjusting the sound quality (TONE)

The tone control function will not work in the direct mode.

1

The tone switches as follows each time the TONE CONTROL

 

 

button is pressed.

 

 

TONE

 

 

CONTROL

 

 

BASS

TREBLE

2

(Main unit)

 

With the name of the volume to be

SELECT

adjusted selected, turn the SELECT knob to adjust the level.

(Main unit)

•To increase the bass or treble: Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in steps of 2 dB.)

•To decrease the bass or treble: Turn the control clockwise. (The bass or treble sound can be decreased to up to –12 dB in steps of 2 dB.)

[2]Listening over headphones

1

Connect the headphones to the

PHONES

 

 

PHONES jack of the front panel.

 

 

 

 

1

2

Press the OUTPUT button to play the sound over the

 

 

headphones only.

 

TV/

0

+10

 

VCR

 

OUTPUT

 

 

2

TEST

SPEAKER

OUTPUT

TONE

 

SURROUND

 

 

DOLBY/DTS

DSP

5CH / 7CH

 

SURROUND

SIMU.

STEREO

 

•The output to the speaker and pre-out jacks is turned off and no sound is produced from the speakers.

Caution: Switching off the power of the unit and the unit will cancel the settings.

[3] Turning the sound off temporarily (MUTING)

1

Use this to turn off the audio output

 

 

 

 

temporarily.

MUTING

 

Press the MUTING button.

 

Cancelling MUTING mode.

Press the MUTING button again.

(Remote control unit)

B

3

2 1

3

If you do not want the bass and treble to be adjusted, turn on

the tone defeat mode.

 

 

TONE DEFEAT

 

The signals do not pass through the

 

bass and treble adjustment circuits,

 

providing higher quality sound.

B

1

NOTE:

To prevent hearing loss, do not raise the volume level excessively when using headphones.

TUNING

+

 

+

 

SKIP

ENTER

 

-

SHIFT

-

 

SKIP

MUTING

1

TUNER

PHONO

CD

1 2 3

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents AVR-3802 Safety Precautions Safety Instructions Before Using Table of ContentsFeatures Connections Connecting the audio componentsConnecting video components Precaution when using S-jacks Connecting a video component equipped with S-Video jacksConnecting a monitor TV Connecting the video decksConnecting a monitor TV Monitor OUT jack Connecting a DVD player DVD in jacksAM loop antenna assembly FM antenna adapter assembly Connecting the antenna terminalsConnecting the Multi Zone jacks Connecting the external input EXT. in jacksPrecautions when connecting speakers Connecting banana plugsSpeaker system connections ConnectionsProtector circuit @9@8@7 Part Names and FunctionsFront Panel Surround Speaker A/BDISPLAY/SURR. Para Remote control unitSystem Setup button Setting UP the SystemPress this to display the system setup menu Cursor buttonsSB Surround Back Speaker Surround speaker selector functionBefore setting up the system Setting the power amplifier assignmentSetting the type of speakers Parameters Enter the setting Setting the Crossover Frequency and Subwoofer modeSelect the Subwoofer Mode Select the settingSubwoofer mode Assignment of low frequency signal rangeSetting Crossover FrequencyPreparations Setting the delay timeSwitch to the Channel Level screen Select Test Tone Mode Setting the channel levelSpeaker Configuration, this is set to SB When the surround back speaker setting is set to 1spkr forVolume can be adjusted between -12 dB and +12 dB in units When the Manual mode is selectedSetting the Digital In Assignment To select the input sourceTo select the digital input jack Setting the on-screen display OSD Setting the multi vol. levelDB, -40 dB VariablePress the Enter button Auto Preset Memory screen appears Auto tuner presetsOn-screen display signals After completing system setupRemote Control Unit Using the remote control unitInserting the batteries CD player CD system buttons Tape deck Tape system buttons Operating Denon audio componentsMD recorder MD, CD recorder CDR system buttons Tuner system buttons2, 3 Operating a component stored in the preset memory Checking the preset memory settingsVideo disc player VDP system Digital video disc player DVD, DVD Setup system buttonsButtons Video deck VCR/VCR-2 system Monitor TV TV, digital ButtonsNot Valid Learning functionSYS Mode SYS Call Storing system call signals5, 6 System callUsing the system call function ResettingResetting the system call buttons 5 2, 3, 4, 5Reset ALL Reset SYS Reset PRE Reset LRNResetting the preset memory 5 2, 3, 4, 64, 5 Resetting learned buttons2, 3, 4 All reset functionAuto search function Only when operating with the remote control unit Select AMP using the Receiver buttonTurn on the power Refer to Connections pages 6 to 13 and check that allInput mode selection function Playing the input sourceExample CD Input mode display Input signal displayExample Stereo Press the EXT. in to switch External input Playback using the external input EXT. in jacksSet the external input EXT ModeListening over headphones Adjusting the sound quality ToneAfter starting playback Turning the sound off temporarily MutingPlaying one source while recording another REC OUT mode Multi-source recording/playbackChecking the currently playing program source, etc When Source is selected, the Multi indicator turns Display switches as follows eachThis operation is not possible in the REC OUT mode Select Multi using Receiver buttonMulti Zone Music Entertainment System Multi-zone playback with multi-sourceBefore playing with the surround function SurroundFader function 5 1, 4Panorama Mode Surround parameters q Pro Logic II ModeDimension Control Center Width ControlDetect LED Select the various parameters Adjust the parameter settings Display the surround parameter menuDialogue Normalization Surround modes and their features DSP Surround SimulationPersonal Memory Plus Set the parameters DSP surround simulationWhen turned counterclockwise When turned clockwise1,3 Press the Surround Parameter buttonTone control setting Music CinemaSurround modes and parameters Manual tuning Auto tuningListening to the Radio TunerChecking the preset stations Preset memoryRecalling preset stations Last Function MemoryInitialization of the Microprocessor Troubleshooting Additional Information Types of multi-channel signalsTypes of sources Movie audio Movie theater sound fieldNumber of surround back speakers Surround back speakersSpeaker setting examples When not using surround back speakers When using different surround speakers for movies and musicDolby Surround Dolby Digital Dolby Surround AC-3 SurroundDolby Digital and Dolby Pro Logic Dolby Digital compatible media and playback methodsDTS compatible media and playback methods DTS Digital SurroundDTS-ESTMMatrix DTS-ESTMDiscreteDTS Neo6TM surround DTS Neo6 CinemaSBL & SBR Surround modes and parameters Specifications 14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan

AVR-3802 specifications

The Denon AVR-3802 is a noteworthy feature-rich audio/video receiver that stands out in the realm of home theater systems. Released in the early 2000s, it continues to be appreciated by audiophiles and home cinema enthusiasts alike, thanks to its robust performance and advanced technologies.

One of the standout features of the AVR-3802 is its impressive power output. With a 110 watts per channel rating over 7 channels, it provides ample power to drive a variety of speakers, allowing users to create a dynamic home theater experience. This results in clear, powerful sound across a range of audio formats, from music to movies.

The AVR-3802 is equipped with a comprehensive array of inputs and outputs. It includes multiple analog and digital inputs, allowing for the connection of various audio sources such as CD players, DVD players, and gaming consoles. Additionally, the receiver supports up to seven channels of surround sound, making it compatible with numerous audio formats including Dolby Digital and DTS, which are crucial for cinematic sound experiences.

Another key feature is the incorporation of Denon's proprietary technologies, such as the "Advanced Surround Processing" which enhances the spatial audio experience. This feature helps in creating an immersive environment, utilizing different sound processing modes tailored for different content types, whether it's a concert, movie, or video game.

Denon has also ensured that the AVR-3802 displays excellent video performance. It offers multiple video inputs, including composite, S-video, and component video, facilitating high-quality video playback. The receiver supports up to 1080p video resolution, ensuring compatibility with high-definition displays. Additionally, it includes a built-in video upscaling feature that enhances lower resolution content to optimize the viewing experience.

The user interface on the AVR-3802 is designed with usability in mind. A large, easy-to-read display combined with intuitive remote control navigation simplifies the process of adjusting settings, programming presets, and switching between inputs.

In summary, the Denon AVR-3802 remains a solid choice for those seeking a high-performance audio/video receiver. With its robust power handling, versatile connectivity options, advanced surround sound processing, and high-definition video capabilities, it provides an excellent foundation for building a home entertainment system. Enthusiasts can enjoy rich, immersive audio experiences coupled with stunning video quality, making the AVR-3802 a lasting component in the world of home theaters.
Top Page Image Contents