Philips MCD759D Connections, Set up the surround speakers, Placing the speakers and subwoofer

Connections

English

IMPORTANT!

–The type plate is located at the bottom of the system.

–Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.

–Never make or change any connections with the power switched on.

–A separate power switch is provided on the back of the subwoofer. Please switch it on after completing all connections in order to enjoy 5.1-channel sound output.

Step 1: Set up the surround speakers

OR

1Before connecting the speakers to the DVD system, firmly attach the mini speaker stands to the surround speakers as shown in the above diagram.

OR

2Alternatively, you can choose to mount the speakers on the wall. Mount a screw (not supplied) on the wall where the speaker is to be hung and hook the speaker securely onto the mounted screw.

Note:

– The surround speakers are labeled as REAR L. (left) or REAR R. (right).

Step 2: Placing the speakers and subwoofer

		Center speaker and
		DVD system
Front speaker				Front speaker
			2
	(Left)			(Right)
	1
					1

3	4	3
Surround	Subwoofer	Surround
Speaker (Left)		Speaker (Right)

For best possible surround sound, all the speakers (except subwoofer) should be placed at the same distance from the listening position.

1Place the front left and right speakers at equal distances from the TV and at an angle of approximately 45 degrees from the listening position.

2Place the center speaker above the TV or the DVD system so that the center channel's sound is localized.

3Place the rear speakers at normal listening ear level facing each other or hang on the wall.

4Place the subwoofer on the floor near the TV.

Notes:

–To avoid magnetic interference, do not position the front speakers too close to your TV.

–Allow adequate ventilation around the DVD system.

10