Philips MCD759D quick start Connecting the power cord, Additional Connecting additional equipment

Connections

English

Step 7: Connecting the power cord

1

~ AC MAINS

Power Outlet

After everything is connected properly, plug in the AC power cords of the main set, subwoofer and TV set to the power outlet. Make sure to turn on the power switch on the rear of the subwoofer in order to enjoy 5.1-channel output.

Never make or change any connection with the power switched on.

VIDEO IN

C	AUDIO IN
	R
	VCR
	L

B

AUDIO OUT

L

R

A

Television

Viewing and listening to the playback of other equipment A

●Connect the system's AUX IN (R/L) jacks to the AUDIO OUT jacks on the other audio/visual device (such as a TV,VCR, Laser Disc player or cassette deck).

Before starting operation, press SOURCE on the front panel to select AUX or press AUX on the remote in order to activate the input source.

Additional: Connecting additional equipment

IMPORTANT!

–Some discs are copy-protected.You

cannot record the disc through a VCR or digital recording device.

–When making connections, make sure the colour of cables matches the colour of jacks.

–Always refer to the owner’s manual of the other equipment for complete connection and usage details.

Recording (digital) B

●Connect the system's COAXIAL or OPTICAL jack to the DIGITAL IN jack on a digital recording device (such as DTS-Digital Theatre compatible, with Dolby Digital decoder). Before starting operation, set the DIGITAL OUT according to the audio connection. (See "DIGITAL OUT".)

Using the VCR for recording DVDs C

●Connect one of the system's VIDEO jacks to the corresponding VIDEO IN jack and LINE OUT (R/L) jacks to the AUDIO IN jacks on the VCR.This will allow you to make analogue stereo (two channel, right and left) recordings.

14