Getting Started
Step 3: Setting language preference
You can select your own preferred language settings.This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the disc’s default language will be used instead.The OSD language in the system menu will remain once selected.
Setting the OSD Language
CLOSED CAPTIONS
1Press SYSTEM MENU.
2Press 1 2 to select “GENERAL SETUP PAGE”.
3Use 1 2 3 4 on the remote to navigate in the menu.
Move to “OSD LANGUAGE” and press 2.
4Select a language and press OK.
To exit from the menu
●Press SYSTEM MENU again.
1Press SYSTEM MENU in stop mode.
2Press 1 2 to select “PREFERENCE PAGE”.
3Press 3 4 to highlight the following in the Preference Page.
–“AUDIO” (disc’s soundtrack)
–“SUBTITLE” (disc’s subtitles)
–“DISC MENU” (disc’s menu)
4Enter its submenu by pressing 2.
5Select a language and press OK.
6Repeat steps 3~5 for other language settings.
To exit from the menu
●Press SYSTEM MENU again.
If you choose OTHERS in Audio, Subtitle or Disc Menu,
1Press 3 4 to highlight “OTHERS”.
2Press OK.
English
Setting the Audio, Subtitle and Disc
Menu language
21