ELECTRICAL REQUIREMENTS
The power cord of this appliance is equipped with a
The use of extension cords is not permitted and will void the warranty.
Before connecting your equipment, check that the electrical data on the data plate match your electrical output. If voltage varies by 10 percent or more, freezer performance may be affected. Operating the freezer with insufficient power can damage the compressor. Such damage is not covered under the warranty. If you suspect voltage is high or low, consult your power company for testing.
To prevent the freezer from being turned off accidentally, do not plug unit into an outlet controlled by a wall switch or pull cord.
Do not pinch, knot, or bend the power cord in any manner.
IMPORTANT NOTICE: PLUG THE EQUIPMENT INDEPENDENTLY TO A LOAD CENTER WITH AN
APPROPRIATE CIRCUIT BREAKER ACCORDING TO THE NAMEPLATE AMPS.
PRODUCT LOADING
The CF3 unit is not intended to be a pull down freezer and as such the product must be loaded at their intended merchandising temperature.
Before loading products, allow the equipment to operate empty for at least four hours.
SHELF SPECIFICATIONS
The baskets have been designed to withstand the rigors of normal use. Avoid product overloading to prevent deforming the shelves.
••••