Carrier 1300L, 260L owner manual Install Shelves, Condensate Disposal

Page 5

INSTALL SHELVES

Product shelves and a bag containing shelf support clips are packed inside the unit. Refer to Table 1 to verify quantity of shelves and shelf supporting clips. Bottom shelf must be placed on interior floor and should be inserted into the two retainer clips provided at the rear corners of the unit floor.

Improper shelf clip installation may cause shelf and/ or product to fall which could result in personal injury or damage to the unit.

Do not overload the shelves. The unit is designed to use all the shelves provided, installed in equally spaced configuration. Failure to install shelves cor- rectly could result in personal injury or damage to the unit. If fewer shelves or a different installation configuration is desired, contact the manufacturer to ensure that shelf overloading will not occur.

„TO INSTALL SHELVES — Refer to Figures 5 and 6.

1.Determine proper location for shelf clips. Refer to the numbers on the pilaster to ensure that all clips are properly located.

2.Insert top tab of the shelf clip into the desired hole of the pilaster. The retaining tab should be facing upward as shown in Figure 5.

3.Rotate the clip downward and insert the bottom tab into the appropriate hole on the pilaster.

If necessary, squeeze the clip slightly during installation.

4.Install all remaining clips as described above.

5.Install shelves onto clips so that the product retention bar is facing upward. Be careful not to dislodge clips during shelf installation.

6.Shelves must be placed so that the retaining tab on the shelf clip captures the shelf as shown in Figure 6.

7.Before loading the shelf, ensure that the shelf is resting on each of 4 clips and that the clips are installed as shown in Figures 5 and 6.

CONDENSATE DISPOSAL

The evaporator drain pan is located in the base of the cartridge. Airflow in cartridge compartment hastens condensate evaporation so that external drain plumb- ing is not required.

TOP TAB

FULLY INSERTED

INTO SLOT

BOTTOM TAB

FULLY SEATEDIMPROPERLY INSTALLED CLIP (UPSIDE DOWN)

PROPERLY INSTALLED CLIP

RETAINING TAB

TOP TAB

SHELF CLIP

a79-5

BOTTOM TAB

FIGURE 5 — SHELF CLIP INSTALLATION

PILASTER

SHELF

RETAINED

BY TAB

a79-6

PRODUCT

RETENTION BAR

FIGURE 6 — PROPER INSTALLATION OF

SHELF ON CLIP

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Miracool Glass Door Merchandiser Installation ContentsUnit Inspection GeneralMiracool Bottle Cooler Unit Components Size 750L Shown „ to Remove Cartridge Level UnitCondensate Disposal Install ShelvesPreliminary Checks START-UPUnit Data Initial START-UP„ Electrical Supply and Connections Service and Troubleshooting Refrigeration System ServiceComponents „ Liquid Control and Heat Exchanger„ Evaporator Compartment Interior top area Refer to Figures 10-12 for wiring diagrams Refrigeration System Service and Analysis ChartWiring DIAGRAM, Sizes 260L, 300L Wiring DIAGRAM, Size 750L Wiring DIAGRAM, Sizes 1100L, 1300L Maintenance Task Cleaning Agent Method Effect on Finish APPLICATION† Methods for Cleaning Stainless SteelCopyright 2006 Carrier Corporation

1300L, 260L specifications

The Carrier 260L and 1300L represent notable advancements in the realm of air conditioning systems, particularly designed for both commercial and industrial applications. These models are renowned for their efficiency, robust performance, and the integration of cutting-edge technologies.

The Carrier 260L is characterized by its remarkable energy efficiency, with a focus on reducing operational costs while maintaining optimal cooling performance. It is available in various capacities, making it suitable for a wide range of spaces, from medium-sized commercial installations to large-scale industrial facilities. The model incorporates advanced inverter technology, enabling it to adjust the compressor speed according to the cooling demand. This results in both energy savings and enhanced comfort, as the system can maintain a stable temperature with minimal fluctuations.

In contrast, the Carrier 1300L is tailored for larger industrial applications, offering even greater cooling capacities. This model is designed to tackle high thermal loads, making it ideal for factories, warehouses, and other large spaces where cooling requirements can fluctuate significantly. The 1300L also features robust construction principles, ensuring reliability and longevity even in demanding environments.

Both models share several key features that elevate their performance. They are equipped with eco-friendly refrigerants, aligning with global sustainability efforts. The units boast sophisticated control systems that allow for precise temperature management, remote monitoring, and integration with building management systems. This not only enhances user convenience but also promotes energy management strategies that are increasingly critical in today's energy-conscious world.

Moreover, the Carrier 260L and 1300L are designed with ease of maintenance in mind. Their modular components facilitate quicker access for service technicians, ensuring minimal downtime. Enhanced filtration systems improve indoor air quality, capturing dust and other particulates effectively, which is a key consideration in commercial settings.

In summary, Carrier's 260L and 1300L models stand out for their energy efficiency, advanced technology integration, and user-friendly features. They effectively meet the cooling challenges faced in commercial and industrial environments while adhering to sustainability goals, enhancing both user experience and operational efficiency. These systems exemplify Carrier's commitment to quality, reliability, and innovation in air conditioning solutions.
Top Page Image Contents