Carrier 260L, 1300L owner manual Start-Up, Preliminary Checks

Page 6

START-UP

PRELIMINARY CHECKS

„BI-PIN FLUORESCENT LAMP INSTALLATION/ VERIFICATION — Before applying power to the unit, verify that all lamps have been properly installed and are fully engaged in the lamp holders. Sizes 750L, 1100L, and 1300L have 2 lamps, one in the signboard and one inside the cooler. Sizes 260L and 300L have one lamp inside the cooler.

Improperly installed lamps may cause damage to the lighting circuit. Carrier will not be responsible for equipment or component failures or other dam- ages or losses that arise as a result of improper lamp installation.

To achieve proper lamp engagement, rotate the lamp 90 degrees from its insertion position until it snaps or clicks into place.

On units without safety shields, visually verify proper lamp installation by checking the identification mark on the end of the bulb. If the bulb has been properly installed, the mark will be centered between the “halves” of the lamp holder. Refer to Figure 7.

On units with safety shields, the identification mark cannot be seen. (See Figure 8.) Verify manually that the lamp has been rotated and locked into place.

a79-7

BI-PIN LAMP END IDENTIFICATION MARK

Properly installed lamp without shield. Verify identification mark is positioned as shown.

FIGURE 7 — CHECK INSTALLATION OF LAMP WITHOUT SAFETY SHIELD

PINS MAY NOT BE VISIBLE IN

a79-8

ACTUAL INSTALLATION

 

Properly installed lamp with shield. Requires manual verification that lamp has been rotated and locked into place.

Improperly installed lamp with shield. Note that pins have not achieved full 90° rotation.

FIGURE 8 — CHECK INSTALLATION OF LAMP WITH SHIELD

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Miracool Glass Door Merchandiser Unit Inspection ContentsInstallation GeneralMiracool Bottle Cooler Unit Components Size 750L Shown Level Unit „ to Remove CartridgeInstall Shelves Condensate DisposalSTART-UP Preliminary ChecksInitial START-UP „ Electrical Supply and ConnectionsUnit Data Components Refrigeration System ServiceService and Troubleshooting „ Liquid Control and Heat Exchanger„ Evaporator Compartment Interior top area Refrigeration System Service and Analysis Chart Refer to Figures 10-12 for wiring diagramsWiring DIAGRAM, Sizes 260L, 300L Wiring DIAGRAM, Size 750L Wiring DIAGRAM, Sizes 1100L, 1300L Maintenance Methods for Cleaning Stainless Steel Task Cleaning Agent Method Effect on Finish APPLICATION†Copyright 2006 Carrier Corporation

1300L, 260L specifications

The Carrier 260L and 1300L represent notable advancements in the realm of air conditioning systems, particularly designed for both commercial and industrial applications. These models are renowned for their efficiency, robust performance, and the integration of cutting-edge technologies.

The Carrier 260L is characterized by its remarkable energy efficiency, with a focus on reducing operational costs while maintaining optimal cooling performance. It is available in various capacities, making it suitable for a wide range of spaces, from medium-sized commercial installations to large-scale industrial facilities. The model incorporates advanced inverter technology, enabling it to adjust the compressor speed according to the cooling demand. This results in both energy savings and enhanced comfort, as the system can maintain a stable temperature with minimal fluctuations.

In contrast, the Carrier 1300L is tailored for larger industrial applications, offering even greater cooling capacities. This model is designed to tackle high thermal loads, making it ideal for factories, warehouses, and other large spaces where cooling requirements can fluctuate significantly. The 1300L also features robust construction principles, ensuring reliability and longevity even in demanding environments.

Both models share several key features that elevate their performance. They are equipped with eco-friendly refrigerants, aligning with global sustainability efforts. The units boast sophisticated control systems that allow for precise temperature management, remote monitoring, and integration with building management systems. This not only enhances user convenience but also promotes energy management strategies that are increasingly critical in today's energy-conscious world.

Moreover, the Carrier 260L and 1300L are designed with ease of maintenance in mind. Their modular components facilitate quicker access for service technicians, ensuring minimal downtime. Enhanced filtration systems improve indoor air quality, capturing dust and other particulates effectively, which is a key consideration in commercial settings.

In summary, Carrier's 260L and 1300L models stand out for their energy efficiency, advanced technology integration, and user-friendly features. They effectively meet the cooling challenges faced in commercial and industrial environments while adhering to sustainability goals, enhancing both user experience and operational efficiency. These systems exemplify Carrier's commitment to quality, reliability, and innovation in air conditioning solutions.
Top Page Image Contents