Installation and Tapping Beer Dispensers | Perlick H Series instruction

Installation and Tapping – Beer Dispensers

Connecting the Keg Coupler

(when Supplied by Perlick)

■	Place one brown leather washer into black beer
	line connector hose on hex nut side. Screw
	connector to stainless steel beverage line on
	faucet standard. Tighten with a wrench, but do
	not over tighten.
■	Make sure lever handle on the keg coupler is in
	the UP (untapped) position. Place one brown
	leather washer into wing nut end of black beer
	line connector hose and thread onto top of keg
	coupler. Hand tighten.
■	Place clamp on one end of red air line. Push
	end over air valve located inside cabinet.
	Tighten clamp with screwdriver. Turn shut-off
	valve to OFF (horizontal) position.

Connecting the Regulator to the CO2 Cylinder

■Remove blue plug from regulator fitting. (Note: Do not remove the carbonic washer).

■Screw regulator onto gas cylinder valve. Tighten with wrench until vertically straight. Be sure that shut-off valve (black lever) on regulator is in the OFF (horizontal) position.

■Place a screw clamp over end of red air line and push onto regulator tailpiece. Tighten clamp with a screwdriver.

REGULATOR	HAND
FITTING	HAND
CO2	VALVE
PRESSURE
GAUGE

20 40

PERLICK

1050

■ Place clamp on the other end of red air line and

push over tailpiece on coupler. Tighten clamp

with screwdriver.

CAUTION: Do not use keg coupler as a

handle to lift keg.

Tapping a Single Valve Keg (Sankey):

PSI

FITTING FOR RED AIR HOSE

CO2

GAS

DRUM

REGULATOR

ADJUSTING

Step 1

Single Valve Keg Coupler

Step 3

Step 2

■Be sure beer faucet is in closed position.

■Align keg lugs with lug openings on bottom of coupler.

■Turn clockwise 1⁄4 turn. Pull handle out and down. Keg is now tapped.

■Open shut-off valve on air divider located inside of the cabinet.

Important: Be sure to close this valve when untapping keg.

SHUT-OFF VALVE SCREW (BLACK LEVER IN

CLOSED POSITION)

Adjusting the CO2 Gas Flow

■Turn regulator adjusting screw counterclockwise until it turns freely.

■Turn hand valve counterclockwise on CO2 cylinder to the fully open position.

■Turn regulator adjusting screw clockwise until desired pressure is reached (approximately

12-15 lbs.). Tighten stop nut on adjusting screw.

■Open shut-off valve on bottom of regulator.

Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.

H Series specifications

The Perlick H Series is a standout line in the realm of professional refrigeration and beverage dispensing solutions. Designed with the needs of commercial establishments in mind, this series offers a blend of functionality, efficiency, and aesthetic appeal. It's particularly suited for bars, restaurants, and cafes that require reliable and stylish equipment for serving beverages.

One of the main features of the Perlick H Series is its innovative design, which prioritizes accessibility and ease of use. The units in this series are built with a spacious interior, allowing for maximum storage of kegs, bottles, and cans. The design also incorporates a sleek, stainless-steel finish that not only enhances durability but also adds a modern look to any establishment.

In terms of technology, the Perlick H Series boasts energy-efficient refrigeration systems. These units are engineered with advanced cooling technology that ensures consistent temperatures while consuming less energy. This not only helps in reducing operational costs but also aligns with the increasing need for sustainability in the restaurant and hospitality sectors.

Another notable characteristic of the H Series is its versatility. It includes a range of configurations, from compact models to larger setups, accommodating the varying needs of businesses. Whether a small craft beer pub or a large-scale event venue, the H Series provides options that can fit different spaces and requirements.

The Perlick H Series also focuses on user-friendly features. It incorporates customizable shelving and storage options, allowing operators to organize their inventory effectively. Additionally, the series includes intuitive control systems that enable precise temperature management, ensuring that beverages are always stored at optimal conditions.

Furthermore, the H Series is designed with ease of maintenance in mind. Removable parts and a straightforward cleaning process ensure that upkeep is manageable, aiding in maintaining hygiene standards essential in food and beverage service.

In summary, the Perlick H Series represents a comprehensive solution for beverage dispensing and refrigeration in commercial settings. Its combination of innovative technology, user-centric design, and energy efficiency makes it a top choice for establishments looking to enhance their beverage service capabilities while also considering sustainability. The H Series is not just about functionality; it’s about creating an elevated experience for both operators and patrons alike.