LG Electronics LDF8812BB Adding Rinse Aid to dispenser, Filling Rinse Aid, Refilling Rinse Aid

U SING YOUR DISHWASHER

USING YOUR DISHWASHER

Adding Rinse Aid to dispenser

The use of rinse aid is required to prevent possible spots on dishes water droplets remaning after the completion of the wash cycle and to enhance the performance of the dry cycle.

NOTE

Only liquid rinse aid can be used for this dishwasher.

�Filling Rinse Aid

1.Rotate the round cap counterclockwise and remove it.

2.Add a liquid rinse aid to the maximum level. (Max. 4.8 oz (145ml))

3. Replace and lock the cap.

�Rinse Aid Amount Setting

The factory setting is at level 3, which is where you can expect the best performance under most conditions. Setting the rinse aid control to a setting that is too low will contribute to spotting and streaking of the dishes and poor drying performance. Setting the control too high can cause foaming which will cause poor wash performace or failure.

1.Remove the cap.

2.Rotate adjuster to the desired setting.

�Refilling Rinse Aid

4.8oz (145ml) is the capacity of the rinse aid dispenser. How often you need to refill the rinse aid dispenser depends on your washing habits such as the number of washes per month and which rinse aid setting you use. The indicator light will inform you when the rinse aid level is low. The indicator light will stay on when you close the door to start a cycle.

NOTE

When the lamp is on, it

4. Rinse aid will be automatically dispensed during	indicates the rinse aid reservoir
	is almost empty.
the final rinse cycle.

14