Kuppersbusch USA GKS 11742.0-35 F-UL manual Cleaning

Page 7

CLEANING

The enamelled grids, enamelled covers “A”, “B” and “C”, and burner heads “M” (see fig. 4 and 4/A) must also be washed and the ignition elements “AC” and safety cut-off sensors “TC” (see fig. 5) must be cleaned. Do not wash them in the dishwasher.

Cleaning operations must be carried out when the hob and components are not hot and the use of metal scouring pads, powder abrasives and corrosive sprays must be avoided.

Do not allow vinegar, coffee, milk, salt water, lemon juice or tomato juice to remain in prolonged contact with the surfaces.

WARNINGS:

when reassembling the components, observe thefollowingrecommendations:

- check that the holes in the burner heads “M” (fig.4)arenotblockedbyforeignbodies.

- Ensure that the enamelled covers “A”, “B” and “C” (fig. 4 and 4/A) are correctly positioned on the burner head. The covers are correctly positioned on the head when they areperfectlystable.

-If the opening and closing of any valve is awkward, do not force it but request urgent intervention by the technical assistance service.

-Do not use jets of steam to clean the appliance.

-To prevent difficulties with lighting, regularly clean the ignition elements (ceramic and electrode)andsafetycut-offdevices.

FIGURE 1

FIG.4

FIG.4/A

FIG.5

7

Image 7
Contents Model GKS 11742.0-35 F-UL Model GKS 11742.0-35 F-UL DescriptionofhobsSafe Guard Instructions SafeguardinstructionsBurners USEUSE Worktop CleaningCleaning 4INSTALLINGTHEWORKTOP InstallationFixing the HOT Plate 7GASCONNECTION 6ROOMVENTILATIONNaturalGasandPropaneGas Electricalconnection Fixing the HOT Plate Reducedrateadjustment AdjustmentsReplacing the Injectors ConversionsArrangement of the Burners Liquid. Theuseoftheflameisprohibited ServicingReplacing Components Greasingthetapsseefig.174BURNERS110 TechnicaldataonthedatalabelBrand Model Series Technicalassistanceandspares