Delayed Bake Cycle

TO BAKE OR ROAST

I URN TO	TURN TO	TURN TO
SET LENGTH	SET TEMP	SET OVEN

PUSH WHEN

FINISHED

ICANCEL

TIMER CLOCK ;j; CLEAN cTF)Mo BROIL BAKE

The red display will show the oven temperature as it rises (in		PUSH	PUSH	PUSH
5;” steps).	When cook time has ended, a tone will sound and the oven
	When cook time has ended, a tone will sound and the oven
A tone will sound when the oven is ready	will turn	off.
A tone will sound when the oven is ready

PUSH 03 PUSH

The ERC will calculate when to turn the oven off.

When the stop time is reached, a tone will sound and the oven will turn off,

INCOMPLETE OR INCORRECT

SETTINGS

1Attention Tone will sound if oven has only been partially programmed. For example, if you have selected a cook time but no temperature, you will heartheAttentionTone until you select a temperature or push CANCEL.

2Function Error Tone will sound if there is a problem with one of the range functions. Cancel the tone by pushing the CANCEL button. If the tone starts again, call for service.

RECALLING FUNCTIONS

You may recall any set function by pushing the button of that function

TO USE THE TIMER

TURN TO

SET AMOUNT 02

OF TIME \

	/		,
01	PUSH	73 3	PUSH AND HOLD
01		73 3	3 SECONDS TO CANCEL

A tone will sound when time is up.

NOTE: The timer is a reminder only and will not operate

tne oven.

CANCELLING TONES

If you prefer that your range not have a tone whenever you push a button, you can eliminate those tones by pushing and holding the CANCEL button until you hear a beep. Repeat to activate tones again.

PREHEATING FOR AUTOMATIC OVEN OPERATIONS

Cooktimesprogrammedforautomaticovenoperationsstart

counting down when the oven first comes on, not when it has reached the set temperatures. It takes 10 to 15 minutes to reach the set temperature, thus additional cook time may be necessary.

CCTLOl -7