Roper 4347928 (333240-1) manual Removable Oven Door, Removable Oven Racks

Page 30

REMOVABLE OVEN DOOR

To remove:

1.Open the door to the stop position (see illustration).

2.Grasp the door at each side and lift up and off the hinges.

See the cleaning chart on page 25.

NOTE: When the door is removed and hinge arms are at stop position, do not bump or try to move the hinge

arms. The

hinges could snap

back causing an injury to

the hands

or

damage to the porcelain

on the front

of the

range.

Cover

the

hinges

with

 

toweling

or empty

towel

..

. ..

 

__

.

oven

area.

 

 

rorls

while

working

in the

 

 

STOP POSITION

To replace:

1.Hold the door over the hinges with the slots at the bottom edge of the door lined up with the hinges. The hinge arms must still be in the stop position.

2.Slide the door down onto the hinges as far as it will go and close the door.

REMOVABLE OVEN RACKS

Be careful not to scratch the oven finish when installing or removing oven racks.

BUMP IN

RACK GUIDE

To install:

1.Set the raised back edge of the rack on a pair of rack guides.

2.Push the rack in until you reach the bump in the rack guide, then lift the front of the rack a bit and push the rack all the way in.

To remove:

1.Pull the oven rack out, then up, in one motion. See the cleaning chart on page 25.

28

Page 29 Page 31
Image 30
Page 29 Page 31
Contents AL-I Read and Save this BookThispage Intentionallyleftblank Maintenance UsingOven Cleaning Care Model NO. Serial no Date PurchasedGeneral Protect Your ChildrenSafe ,TY Grease Fires SELF-CLEANING Oven Putting OUT a Grease FireVentilating Fans Important Information Using Open Coil Elements Using Cooktop Controls RecipesCooktop Signal Light Using Downdraft VentingCleaning Downdraft Vents Grease JarsUsing Electric Elements dlrB’ Inserting a Module @Cleaning the Modules Removing a Module #DEnergy Saving Tips Choosing Cooktop CookwareCookware Chart Control Setting GuideUsing the Grill Inserting the Grill ModuleRemoving the Grill Module Cleaning the Grill ModuleGrilling Tips Module CoverChart Page Inserting the Griddle Module Using the GriddleCleaning the Griddle Removing the Griddle ModuleGriddle Chart Salt Using the Rotisserie Assembling the Rotiswkebab ModuleRotissing Tips Cleaning the Rotiswkebab Module Shish Kebabing TipsUsing the Oven Oven LightBroiling Tips Using FoilPreheating Positioning Broiler PANUsing a Meat Thermometer RackandpanarrangementOven Common Before a Clean Cycle Important InformationWhen a Clean Cycle is Finished To SET a Clean CycleTo Stop a Clean Cycle After a Clean CycleRemovable Oven Door Removable Oven RacksReplacing the Oven Light GR Griddle does not GET HOT Cooktop Knobs will not TurnAN Element does not Work Excessive SMOKE, or Vent System is not Capturing the SmokeOven will not SELF-CLEAN CLOCK/TIMER does not WorkBroiling Problems Oven Door will not Unlock After SELF-CLEANING CycleModules and Accessories Limited Warranty

4347928 (333240-1) specifications

The Roper 4347928 (333240-1) is an advanced mechanical component designed for various industrial applications, showcasing a blend of robust materials, precise engineering, and cutting-edge technology. This product is recognized for its reliability and efficiency, making it a preferred choice among professionals in multiple fields.

One of the standout features of the Roper 4347928 is its durable construction. Made from high-quality materials, this component is capable of withstanding harsh operating conditions, including extreme temperatures and corrosive environments. This durability ensures long-term performance and minimizes the need for frequent replacements, ultimately leading to cost savings.

The Roper 4347928 also boasts a compact design, which is essential for applications where space is limited. Its small footprint allows for easy integration into existing systems, making it a versatile solution for various machinery and equipment. This adaptability is further enhanced by its compatibility with different models, ensuring seamless installation and operation.

In terms of technology, the Roper 4347928 incorporates advanced engineering principles that contribute to its high performance. The component features precision machining that enhances its operational efficiency, reducing friction and wear during use. This not only improves the lifespan of the component but also ensures a smoother operation, which is critical in maintaining overall system reliability.

Another characteristic that sets the Roper 4347928 apart is its ease of maintenance. The design includes accessible points for lubrication and inspection, allowing users to perform regular checks with minimal effort. This user-friendly aspect is vital for industries where downtime can result in substantial losses, as it enables quicker service and less interruption in operations.

Moreover, the Roper 4347928 is subject to rigorous quality control measures during the manufacturing process. Each unit undergoes thorough testing to ensure it meets industry standards for performance and safety. This commitment to quality guarantees that users receive a product they can trust for their critical applications.

In conclusion, the Roper 4347928 (333240-1) represents a well-engineered solution characterized by its durability, compact design, advanced technology, ease of maintenance, and adherence to quality standards. Whether used in manufacturing, automotive, or various other sectors, this component delivers exceptional performance and reliability, making it a valuable asset in any industrial setting.
Top Page Image Contents