Roper RUD1000, RUD5000 manual Drying System, Overfill Protection Float, Delay Hours on some models

Page 13

Delay Hours (on some models)

Select this option to run your dishwasher at a later time or during off-peak hours.

To delay the start

1.Close the door.

2.Select a wash cycle and option. Press the desired cycle. Turn the Cycle Control knob clockwise to the number of hours you want the dishwasher to delay the start.

The dishwasher starts the cycle in the selected number of hours. You can add items while the time is counting down.

3.Close and latch the door. The Cycle Control knob will not advance if the door is unlatched.

NOTES:

To cancel the delay, turn the Cycle Control knob to the desired cycle.

Rinse & Hold and the Light Wash cycles (on some models) cannot be delayed.

IMPORTANT:

Operate your dishwasher only when you are at home.

If your home is equipped with a water softener, do not start the dishwasher during the regeneration of the softener.

Drying System

During drying, you can see steam escaping through the vent at the upper left corner of the door. This is normal as the heat dries your dishes.

IMPORTANT: The vapor is hot. Do not touch the vent during drying.

Overfill Protection Float

The overfill protection float (in the front right corner of the dishwasher tub) keeps the dishwasher from overfilling. It must be in place for the dishwasher to operate.

Check under the float for objects that may keep the protector from moving up or down.

WASHING SPECIAL ITEMS

If you have doubts about washing a particular item, check with the manufacturer to see if it is dishwasher safe.

Material

Dishwasher Safe?/Comments

 

 

Aluminum

Yes

 

High water temperature and detergents

 

can affect finish of anodized aluminum.

 

 

Disposable

No

Aluminum

Do not wash throwaway aluminum pans

 

 

in the dishwasher. These might shift

 

during washing and transfer black marks

 

to dishes and other items.

 

 

Bottles and Cans

No

 

Wash bottles and cans by hand. Labels

 

attached with glue can loosen and clog

 

the spray arms or pump and reduce

 

washing performance.

 

 

Cast Iron

No

 

Seasoning will be removed and iron will

 

rust.

 

 

China/

Yes

Stoneware

Always check manufacturer’s

 

 

recommendations before washing.

 

Antique, hand-painted, or over-the-glaze

 

patterns may fade. Gold leaf can discolor

 

or fade.

 

 

Crystal

Yes

 

Check manufacturer’s recommendations

 

before washing. Some types of leaded

 

crystal can etch with repeated washing.

 

 

Gold

No

 

Gold-colored flatware will discolor.

 

 

Glass

Yes

 

Milk glass yellows with repeated

 

dishwasher washing.

 

 

Hollow-Handle

No

Knives

Handles of some knives are attached to

 

 

the blade with adhesives which can

 

loosen if washed in the dishwasher.

 

 

Pewter, Brass,

No

Bronze

High water temperatures and detergent

 

 

can discolor or pit the finish.

 

 

Disposable

No

Plastics

Cannot withstand high water

 

 

temperatures and detergents.

 

 

Plastics

Yes

 

Always check manufacturer’s

 

recommendations before washing.

 

Plastics vary in their capacity to withstand

 

high temperatures and detergents. Load

 

plastics in top rack only.

13

Image 13
Contents LAVE-VAISSELLE Encastré Undercounter DishwasherTable of Contents Your safety and the safety of others are very important Dishwasher SafetyBefore Using Your Dishwasher Parts and Features Control Panels START-UP Guide Using Your New DishwasherDishwasher Loading Stopping Your DishwasherLoading the Bottom Rack Loading the Top RackExtra-capacity fold-down shelves on some models Loading the Silverware Basket Dishwasher USEDetergent Dispenser Filling the dispenserRinse Aid Dispenser Where to fillWater Hardness Amount of Detergent Checking the dispenserTo check water temperature Cycle Selection ChartDishwasher Efficiency Tips Changing a Cycle or Setting Canceling a CycleOption Selections Adding Items During a CycleDrying System Delay Hours on some modelsOverfill Protection Float Cleaning the Filter Screen Cleaning Your DishwasherCleaning the exterior Cleaning the interiorDrain Air Gap TroubleshootingStoring Your Dishwasher Dishes do not dry completely Spots and stains on dishesDishes are damaged during a cycle For service in Canada If you need replacement partsU.S.A CanadaWhirlpool Corporation will not pay for Roper Dishwasher WarrantyVotre sécurité et celle des autres est très importante LA Sécurité DU LAVE-VAISSELLEPour un lave-vaisselle branché en permanence Avant d’utiliser le lave-vaissellePièces ET Caractéristiques Tableaux de commande Chargement DU LAVE-VAISSELLE Guide DE Mise EN MarcheUtilisation de votre nouveau Lave-vaisselle Arrêt du lave-vaisselleChargement du panier inférieur Chargement du panier supérieurChargement du panier à couverts Utilisation DU LAVE-VAISSELLEDistributeur de détergent Remplissage du distributeurOù remplir Distributeur d’agent de rinçageDureté de l’eau Quantité de détergent Vérification du distributeurTableau de sélection de programme Conseils d’efficacité pour Le lave-vaisselleContrôle de la température de l’eau Changement d’un programme Ou réglage Annulation d’un programmeAddition de vaisselle durant un programme Sélection d’optionsSystème de séchage Delay Hours/lavage différé sur certains modèlesDispositif de protection contre le débordement Heated Dry/séchage chaudMatériau Lavable au lave-vaisselle? Commentaires Lavage D’ARTICLES SpéciauxOui NonNettoyage du lave-vaisselle Entretien DU LAVE-VAISSELLENettoyage de l’écran de filtre Dispositif anti-refoulementVaisselle pas complètement nettoyée DépannagePrésence de taches sur la vaisselle Vaisselle endommagée au cours d’un programme Vaisselle pas complètement sècheMarques noires ou grises sur la vaisselle La vaisselle n’est pas sèchePour le service Assistance OU ServiceSi vous avez besoin de pièces de rechange Pour l’assistanceWhirlpool Corporation ne paiera pas pour Garantie DU LAVE-VAISSELLE RoperTous droits réservés 8051572
Related manuals
Manual 36 pages 52.5 Kb

RUD3000, RUD5750, RUD1000, RUD5000 specifications

The Roper RUD series, comprising the RUD5000, RUD1000, RUD5750, and RUD3000, represents a significant advancement in the field of industrial technology, designed to enhance operational efficiency and performance in various applications. These models cater to a diverse range of industries, including construction, mining, and manufacturing, providing robust solutions with unique features and characteristics.

The RUD5000 is renowned for its powerful performance and durability. Equipped with advanced hydraulic systems, it delivers exceptional lifting capacities, making it ideal for heavy-duty applications. The RUD5000’s frame is constructed from high-strength materials, ensuring resilience under extreme operating conditions. Its smart control interface allows for intuitive operation, enabling operators to monitor and adjust settings in real-time.

The RUD1000, on the other hand, is a versatile option favored for its compact design and portability. This model is engineered for tasks requiring high mobility without compromising on power. The RUD1000 incorporates innovative safety features, such as overload protection and emergency stop functions, making it a reliable choice for various job sites. Its ease of use and low maintenance requirements make it a practical solution for small to medium-sized operations.

For those seeking an intermediary solution, the RUD5750 stands out with its balance of features. Combining the robustness of the RUD5000 and the compactness of the RUD1000, the RUD5750 offers excellent performance with a customizable configuration. It supports a wide range of attachments, enhancing its functionality across different tasks. Its advanced smart technology ensures energy efficiency while maintaining high output levels.

Lastly, the RUD3000 is distinguished by its energy-efficient design, specifically tailored for environmentally conscious operations. This model employs cutting-edge technology to minimize energy consumption while maximizing performance. The RUD3000 is equipped with a user-friendly interface and connectivity options that allow for remote monitoring and diagnostics. Its robust construction assures longevity, making it an investment for sustainable industrial practices.

In conclusion, the Roper RUD series offers an impressive lineup of machines, each designed with distinct features and technologies to cater to various industrial needs. With a focus on performance, safety, and efficiency, these models exemplify the modern advancements in industrial machinery, making them invaluable assets in today’s demanding work environments.