Roper RUD1000, RUD5000, RUD5750 Dishwasher USE, Loading the Silverware Basket, Detergent Dispenser

Page 9

Loading the Silverware Basket

Load the silverware basket while it is in the bottom rack or take the basket out for loading on a counter or table.

NOTE: Unload or remove the basket before unloading the racks to avoid spilling water droplets on the silverware.

Style 1

(on some models)

Style 2

(on some models)

Mix items in each section of the basket with some pointing up and some down to avoid nesting. Spray cannot reach nested items.

IMPORTANT: Always load sharp items (knives, skewers, etc.) pointing down.

NOTES:

Do not load silver or silver-plated silverware with stainless steel. These metals can be damaged by contact with each other during washing.

Some foods (such as salt, vinegar, milk products, fruit juices, etc.) can pit or corrode silverware. Run a rinse cycle if you do not have a full load to wash immediately.

DISHWASHER USE

Detergent Dispenser

The detergent dispenser has 2 sections. The Pre-Wash section empties detergent into the dishwasher when you close the door.

1.

2.

3.

4.

1.Cover

2.Main wash section

3.Cover latch

4.Pre-wash section

The Main Wash section automatically empties detergent into the dishwasher during the main wash. (See the “Cycle Selection Chart.”)

Use automatic dishwashing detergent only. Other detergents can produce excessive suds that can overflow out of the dishwasher and reduce washing performance.

Add detergent just before starting a cycle.

Store tightly closed detergent in a cool, dry place. Fresh automatic dishwasher detergent results in better cleaning.

NOTE: Do not use detergent with a rinse cycle.

Filling the dispenser

1.If the dispenser cover is closed, open the cover by pushing the Cover latch.

2.Fill the Main Wash section with detergent. See “How Much Detergent to Use.”

3.Close the Main Wash dispenser cover. Fill the Pre-Wash section if needed.

It is normal for the cover to open partially when dispensing detergent.

NOTE: Use both sections for cycles with 2 washes. Use only the covered section for cycles with 1 wash. See the “Cycle Selection Chart” for more details.

How much detergent to use

The amount of detergent to use depends on the hardness of your water and the type of detergent. If you use too little, dishes won’t be clean. If you use too much in soft water, glassware will etch.

Water hardness can change over a period of time. Find out your water’s hardness by asking your local water department, water softener company, or county extension agent.

Different brands of dishwasher detergent have different amounts of phosphorous for softening water. If you have hard water and use a detergent with a phosphorous content of less than 8.7%, you might need to use more detergent, or use a detergent with a phosphorous content higher than 8.7%.

9

Image 9
Contents LAVE-VAISSELLE Encastré Undercounter DishwasherTable of Contents Your safety and the safety of others are very important Dishwasher SafetyBefore Using Your Dishwasher Parts and Features Control Panels START-UP Guide Using Your New DishwasherDishwasher Loading Stopping Your DishwasherLoading the Top Rack Loading the Bottom RackExtra-capacity fold-down shelves on some models Loading the Silverware Basket Dishwasher USEDetergent Dispenser Filling the dispenserRinse Aid Dispenser Where to fillWater Hardness Amount of Detergent Checking the dispenserCycle Selection Chart To check water temperatureDishwasher Efficiency Tips Changing a Cycle or Setting Canceling a CycleOption Selections Adding Items During a CycleDelay Hours on some models Drying SystemOverfill Protection Float Cleaning the Filter Screen Cleaning Your DishwasherCleaning the exterior Cleaning the interiorTroubleshooting Drain Air GapStoring Your Dishwasher Spots and stains on dishes Dishes do not dry completelyDishes are damaged during a cycle For service in Canada If you need replacement partsU.S.A CanadaWhirlpool Corporation will not pay for Roper Dishwasher WarrantyVotre sécurité et celle des autres est très importante LA Sécurité DU LAVE-VAISSELLEPour un lave-vaisselle branché en permanence Avant d’utiliser le lave-vaissellePièces ET Caractéristiques Tableaux de commande Chargement DU LAVE-VAISSELLE Guide DE Mise EN MarcheUtilisation de votre nouveau Lave-vaisselle Arrêt du lave-vaisselleChargement du panier inférieur Chargement du panier supérieurChargement du panier à couverts Utilisation DU LAVE-VAISSELLEDistributeur de détergent Remplissage du distributeurOù remplir Distributeur d’agent de rinçageDureté de l’eau Quantité de détergent Vérification du distributeurConseils d’efficacité pour Le lave-vaisselle Tableau de sélection de programmeContrôle de la température de l’eau Changement d’un programme Ou réglage Annulation d’un programmeAddition de vaisselle durant un programme Sélection d’optionsSystème de séchage Delay Hours/lavage différé sur certains modèlesDispositif de protection contre le débordement Heated Dry/séchage chaudMatériau Lavable au lave-vaisselle? Commentaires Lavage D’ARTICLES SpéciauxOui NonNettoyage du lave-vaisselle Entretien DU LAVE-VAISSELLENettoyage de l’écran de filtre Dispositif anti-refoulementDépannage Vaisselle pas complètement nettoyéePrésence de taches sur la vaisselle Vaisselle endommagée au cours d’un programme Vaisselle pas complètement sècheMarques noires ou grises sur la vaisselle La vaisselle n’est pas sèchePour le service Assistance OU ServiceSi vous avez besoin de pièces de rechange Pour l’assistanceWhirlpool Corporation ne paiera pas pour Garantie DU LAVE-VAISSELLE RoperTous droits réservés 8051572
Related manuals
Manual 36 pages 52.5 Kb

RUD3000, RUD5750, RUD1000, RUD5000 specifications

The Roper RUD series, comprising the RUD5000, RUD1000, RUD5750, and RUD3000, represents a significant advancement in the field of industrial technology, designed to enhance operational efficiency and performance in various applications. These models cater to a diverse range of industries, including construction, mining, and manufacturing, providing robust solutions with unique features and characteristics.

The RUD5000 is renowned for its powerful performance and durability. Equipped with advanced hydraulic systems, it delivers exceptional lifting capacities, making it ideal for heavy-duty applications. The RUD5000’s frame is constructed from high-strength materials, ensuring resilience under extreme operating conditions. Its smart control interface allows for intuitive operation, enabling operators to monitor and adjust settings in real-time.

The RUD1000, on the other hand, is a versatile option favored for its compact design and portability. This model is engineered for tasks requiring high mobility without compromising on power. The RUD1000 incorporates innovative safety features, such as overload protection and emergency stop functions, making it a reliable choice for various job sites. Its ease of use and low maintenance requirements make it a practical solution for small to medium-sized operations.

For those seeking an intermediary solution, the RUD5750 stands out with its balance of features. Combining the robustness of the RUD5000 and the compactness of the RUD1000, the RUD5750 offers excellent performance with a customizable configuration. It supports a wide range of attachments, enhancing its functionality across different tasks. Its advanced smart technology ensures energy efficiency while maintaining high output levels.

Lastly, the RUD3000 is distinguished by its energy-efficient design, specifically tailored for environmentally conscious operations. This model employs cutting-edge technology to minimize energy consumption while maximizing performance. The RUD3000 is equipped with a user-friendly interface and connectivity options that allow for remote monitoring and diagnostics. Its robust construction assures longevity, making it an investment for sustainable industrial practices.

In conclusion, the Roper RUD series offers an impressive lineup of machines, each designed with distinct features and technologies to cater to various industrial needs. With a focus on performance, safety, and efficiency, these models exemplify the modern advancements in industrial machinery, making them invaluable assets in today’s demanding work environments.