|
|
|
| TOOLS | YOU MAY NEED |
|
|
|
| _[1/4 | in |
|
| 1/4 | in |
| |
I | c::::::::_j_ | 3/8 | in |
|
| 3/32 | in | 1 |
10 | mm |
|
|
|
| |||
| Hex Socket | Wrench | Phillips Screwdriver | Flat Head Screwdriver | Allen Wrench |
|
| |
NOTE: It is always recommended that the doors be removed when it is necessary to move the refrigerator through a narrow opening. If it is necessary to remove the handles follow the directions below.
NOTE: Handle appearance may vary from illustrations on this page.
DOOR HANDLE | REMOVING |
|
|
| DOOR | HANDLE | INSTALLATION |
|
| ||||||||
1. Removing | Refrigerator | Handle |
|
| 1. Reinstalling |
| Refrigerator | Handle |
| ||||||||
Loosen | the | set | screws | with the | 3/32 | " Allen | wrench | Place the handle on | the door | by aligning |
| ||||||
and remove | the | handle. |
|
|
|
| handle | footprints | to | fit mounting | fasteners | and | |||||
* NOTE: | If | the | handle | mounting | fasteners | need to be | tighten | the set | screws | with | a | 3/32 | " Allen | wrench. | |||
tightened | or | removed, | usea | 1/4 | " Allen | wrench. | NOTE: | If the | handle |
| mounting | fasteners | need to be | ||||
|
|
|
|
|
|
|
| tightened | or | removed, | usea |
| 1/4 | " Allen | wrench. | ||
Mounting
Fasteners
Set Screw
Mounting
Fasteners
Allen Wrench
2.Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of the handle with the 1/8" Allen wrench and remove the handle.
NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4''Allenwrench.
2.Reinstalling Freezer Drawer Handle Place the handle on the door by aligning handle footprints to fit mounting fasteners and tighten the set screws on the bottom of the handle with a 1/8" Allen wrench.
NOTE: If the handle mounting fasteners need to be tightened or removed, usea 1/4''Allenwrench.