
°Remove the ring plug (1) from the valve located at the top of such device.
®
•Place compression nut and the ferule at the end of the
pipeline. Insert pipeline into the connection valve as far as possible. Hold tightly while holding pipeline.
Compression
Nut 1/4"
Ferule
Hold on to the pipe from the handles or grabbers located behind the refrigerator, loosing first the bolt holding the handle. Afterwards, insert pipe into the hole and tighten bolt to finalize.
10.OPEN THE BYPASS VALVE
Tighten all connections containing leaks. Place access cover back on compressor.
11. CONNECT TO REFROGERATOR Fix pipeline in a way that it does
not vibrate on the refrigerator or
wall. Push refrigerator against wall.
12. TURN ICE MAKER ON
Turn ice maker switch into the ON position. Ice maker will start only after reaching its operating temperature
of 15 °F
production if switch is located in the ON position.
26