OPTIBINCRISPERS TheOptiBincrispermaintainsfruitsandvegetablesfresh allowingyouto easilycontrolthehumidityinsidethe drawersTheOptibincrispersinclude1)afronthumidity. controland2)a systemthatallowsyouto preserveor avoidhumidity.
CAUTION: Be careful when you handle the glass cover because it could loose.
RemovingtheInteriorLattice
G\
Removing the Vegetable Drawer / Crisper
• Slip out the drawer towards the outside until it stops
(1)
•Slightly lift the front part and pull the rest (2), in order
to completely remove the drawer.
•To relocate the drawer slip out towards the front until it stops.
®
CRISPER COVER WITH INTERIOR LATTICE (in some models)
Removing the Vegetable Drawer Cover
°Remove both drawers (see "Removing the Vegetable Drawer/Crisper").
•Hold onto the support (1) and pull towards the top and then towards the outside (2).
Installing the Vegetable Drawer Cover
•Put the cover over the supports (1).
•Slightly lift the cover (2) while introducing it to the support (3).
•Put the inferior piece of the cover in the superior support (4).
• Remove the cover (See "Removing the Vegetable Drawer Cover").
•Hold the glass and spin the drawer cover (1).
•Hold the rack and pull the sides of the drawer cover out to take them off (2).
Replacing the Interior Lattice
•For each rack insert the central edge 1 (near the glass cover) and pull the cover sides to insert it.
DOOR RACKS
The door racks are removable for easy cleaning and adjusting.
•To remove the rack, simply lift the rack up and pull straight out (1).
•To replace the rack, slide it in above the desired support button and push down until it stops (2).
©
®
®
WARNING: Somebody can be hurt if door racks are not firmly assembled.
CAUTION: | DO NOT allow children | to play with |
baskets. Sharp corners on baskets could cause
injury.
NOTE: DO NOT adjust a rack that is loaded with food.
19