Liebherr HC 2062, HCB 2062 Panel Dimensions Frameless Installation Style Figure

Page 7

Planning Information

Panel Dimensions - Frameless Installation Style - Figure 6

With this installation style, these wider appliance panels partially overlay the shared side gables of adjacent cabinetry so as to mimic the look of a frameless style cabinet.

The gap between panels with frameless installation style is 1/4" (6 mm). The panels should be at least 5/8 inch (16 mm) thick to allow the connecting rails to be fastened to them.

IMPORTANT

The maximum panel thickness is 3/4" (19 mm).

Cabinet Opening C

Refrigerator door panel D

 

 

80" (2032 mm)

45 - 3/4" (1162 mm)

 

 

84" (2134 mm)

49 - 3/4" (1264 mm)

 

 

Figure 6

7

Image 7
Contents HCB Installation InstructionsPlease Read and Follow These Instructions Installation Guidelines Door swing clearence Figure Planning InformationCabinet Opening Dimensions Figure Panel Dimensions Inset Installation Style Figure Panel Dimensions Frameless Installation Style Figure Mounting the anti tipping device on concrete floors Blocking for SafetyMounting the anti tipping device on wooden floors Cover strips Figure Mounting the anti tipping device in cabinets deeper thanConnection to the Water Supply Safety Instructions and WarningsIceMaker IceMakerIceMaker Fasten the appliance in the recess InstallationAdjusting the front of the drawer Leveling the Appliance FigureMounting the attachment brackets onto the door panels Figure Mounting the refrigerator door Mounting the freezer drawerSoft-stop cylinder retracts in the detached state Installation Mounting the ventilation grille