Liebherr HC 2062, HCB 2062 installation instructions Cabinet Opening Dimensions Figure

Page 5

Planning Information

Cabinet Opening Dimensions - Figure 4

Cabinet

Inset cabinet

Frameless/faceframe cabinet

Height C

Depth B

Depth B

 

 

 

80"

24" + panel thickness

24"

 

 

 

84"

24" + panel thickness

24"

 

 

 

For appliance with panel to be flush, adjacent cabinetry depth must equal appliance depth (24") plus panel thickness (5/8" - 3/4").

IMPORTANT

Do not install the shut-off valve behind the appliance.

The position of the electri- cal outlet is possible within the grey shaded areas or above the appliance.

Water line opening

Water supply line

IMPORTANT

For 24" cabinets, the water line opening must be in the

location as shown in Figure 4.

With cabinets deeper than 24", there is room to fit the pipe behind the appliance and the wall so there are no requirements for the water line lead out position.

Figure 4

IMPORTANT

The free length of the water supply line must be at least 31-1/2" (800 mm) when the tube comes out of the pre- scribed opening.

5

Image 5
Contents HCB Installation InstructionsPlease Read and Follow These Instructions Installation Guidelines Door swing clearence Figure Planning InformationCabinet Opening Dimensions Figure Panel Dimensions Inset Installation Style Figure Panel Dimensions Frameless Installation Style Figure Mounting the anti tipping device on wooden floors Blocking for SafetyMounting the anti tipping device on concrete floors Cover strips Figure Mounting the anti tipping device in cabinets deeper thanIceMaker Safety Instructions and WarningsIceMaker Connection to the Water SupplyIceMaker Adjusting the front of the drawer InstallationLeveling the Appliance Figure Fasten the appliance in the recessMounting the attachment brackets onto the door panels Figure Mounting the refrigerator door Mounting the freezer drawerSoft-stop cylinder retracts in the detached state Installation Mounting the ventilation grille