INSTALLATION
Leveling the appliance - Figure 19
1.The height can be adjusted in front by twisting the leveling feet 1.
2.Twist the adjusting bolt 2 to set up the back of the appliance.
3.Rotate leveling feet 1until firmly in place against the floor.
To prevent the appliance from tipping forward the leveling feet 1(Figure 19) must have contact with the floor.
4.Align appliance with sides of kitchen cabinets by adjusting leveling feet and the supports.
Fasten the appliance in the recess
Fasten the appliance in the recess through the upper and lower hinges of the refrigerator doors. Use 2 screws for each hinge (Figure 20).
screws
ø = 5/32" (4 mm) length = 5/8" (16 mm)
Figure 20
Before mounting the door panels
- Figure 21
Unscrew the upper attachment brackets of both refrigerator doors (Figure 21).
Unscrew the hex nuts and remove the brackets. These brackets will be mounted onto the refrigerator door panels.
5 mm socket 
27 mm wrench 
Figure 19
Figure 21
14