Mounting the freezer drawer

INSTALLATION

panels - Figure 23

The panels can be attached to the appliance now. The upper drawer panel must be mounted first.

1.Pull out the upper freezer drawer and screw on the panel with three screws at left and right hand side using the screws as shown in Figure 23.

2.Close the drawer and check the position to the surrounding cabinet panels. Align the panel in vertical direction by loosening the screws left and right. Finally fasten the screws.

To avoid damage to the screws use the correct screwdriver only. Do not overtighten.

3.Pull out the lower freezer drawer and fasten the lower panel in the same way. Align to the upper drawer panel before fastening the screws finally.

Screw 3.5 x 13 mm

Figure 23

Mounting the refrigerator door

panels - Figures 24 - 31

1.Open the left refrigerator door and hang the panel on the adjusting bolts (Figure 24).

2.Screw on the hex nuts to the adjusting bolts and fasten temporarily (Figure 24).

Figure 24

3.Loosen the four cross-head screws of the bracket and move the panel to the left until it makes contact with the center rail (Figure 25).

4.Fasten the four cross-head screws (Figure 25).

Figure 25