|
| INSTALLATION |
5. | Close the door and check the height of the | 9. Grasp the |
| panel. | (Figure 28). |
6. | Align the panel in its vertical position if |
|
| necessary. Loosen the hex nuts and turn the | The |
| adusting bolts using a screwdriver for slotted | |
| screws (Figure 26). | detached state. |
7.Check the vertical position of the panel again and fasten the hex nuts finally.
Figure 28
Figure 26
To make it possible to fasten the refrigerator panel at the bottom the
8.Stick a small screwdriver under the retaining clamp and lever out (Figure 27).
10.Fasten the refrigerator panel with three screws (4 x 16 mm) at the bottom (Figure 29).
Figure 29
Figure 27
17