Mounting the anti-tipping device

WARNING!

The supplied anti-tipping bracket must be installed in all cases. This prevents the appliance from tipping over when the fully loaded door is opened.

Mounting options

Mounting the bracket with the wall studs. Mounting with plugs to concrete walls.

3 Screws 6 x 60 mm

Wall

Floor

CAUTION!

Ensure that there are no electric cables or water pipes in the wall section to which the anti-tipping bracket is to be secured. These could be damaged during installation.

Installation:

1.Mark the centre line of the appliance on the floor. Align the anti-tipping bracket centre to the centre line.

2.Depending on the constitution of the floor and wall, use any pos- sible mounting option as shown in chapter Mounting Options. The screws (6 x 60) are supplied with the accessory pack.

Important!

If the floor slopes down sideways, the anti-tipping bracket must be fitted horizontally. Lay down spacers in the appropriate positions.

Mounting with the wall plate turning in the screws at an angle.

3 Screws 6 x 60 mm

Wall

Floor

Mounting with wooden floors. Mounting with plugs to concrete floors. 3 Screws 6 x 60 mm

Wall

Floor