Liebherr 7084284-03 General safety information, Conformity, Saving energy

Page 3

General safety information

Note

u Compliance with the ambient temperatures indicated is required, otherwise the cooling performance is reduced.

Climate

for ambient temperatures of

rating

 

SN

10 °C to 32 °C

N

16 °C to 32 °C

ST

16 °C to 38 °C

T

16 °C to 43 °C

1.3 Conformity

The refrigerant circuit has been tested for leaks. When installed, this appliance complies with the relevant safety provi- sions and EC directives 2006/95/EC and 2004/108/EC.

1.4 Saving energy

-Always ensure good ventilation. Do not cover ventilation openings or grille.

-Always keep fan louvres clear.*

-Do not place appliance in areas of direct sunlight or next to a stove, heater or similar object.

-The energy consumption depends on the installation condi- tions, e.g. the ambient temperature (see 1.2) .

-Keep the time the appliance is open to a minimum.

-The lower the temperature setting, the higher the power consumption.

-Store food logically. (see Appliance at a glance).

-Ensure that all food is well packed and covered for storage. This will prevent frost from forming.

-Removemuch. food as needed in order that it does not warm too

-First cool warm food to room temperature before storing it .

-Defrost frozen food in the refrigerator.

-If there is a thick layer of frost in the appliance: defrost the appliance.*

-Empty and switch off refrigerating unit for longer vacation periods.

2 General safety information

Danger for the user:

-

This appliance is not designed for persons (including chil-

 

dren) with physical, sensory or mental impairment or

 

persons not having sufficient experience and knowledge,

 

unless they are instructed in the use of the appliance and

 

are initially supervised by a person responsible for their

 

safety. Keep children under supervision to ensure they do

-

not play with the appliance.

In case of a fault, pull out the mains plug (not by pulling the

-

connecting cable) or switch off the fuse.

Have any repairs to or intervention in the appliance, and any

 

change of the mains power cable, carried out by the

 

customer service only or by other specialised personnel

-

trained for the purpose.

When disconnecting the appliance from the supply, always

-

take hold of the plug. Do not pull the cable.

Only install and connect the appliance according to the

-

instructions.

Only use the appliance when it is installed.

-

Please keep these instructions in a safe place and pass

-

them on to any subsequent owners.

All repairs to and intervention in the IceMaker may be

 

carried out only by service personnel or by other skilled

 

personnel trained for the purpose.*

-The manufacturer is not liable for damage caused by a faulty fixed water connection.*

-Special-purpose lamps (incandescent lamps, LEDs, fluores- cent tubes) in the appliance serve to illuminate the appliance interior and are not suited for room illumination.

Fire hazard:

- The refrigerant R 600a is environmentally friendly but flam- mable. Escaping refrigerant may ignite.

Do not damage the refrigerant circuit pipes.

Do not allow naked flames or ignition sources to enter the appliance.

Do not use any electrical appliances in the interior (e.g. steam cleaners, heaters, ice cream maker etc.).

If refrigerant escapes: eliminate naked flames or sources of ignition from the vicinity. Pull out the power plug. Venti- late the area well. Notify customer service.

-Do not store explosives or sprays using combustible propel- lants such as butane, propane, pentane, etc. in the appli- ance. To identify these spray cans, look for the list of contents printed on the can, or a flame symbol. Gases possibly escaping may ignite due to electrical components.

-Always store high-percentage alcohol in tightly sealed, upright containers. Alcohol possibly escaping may ignite due to electrical components.

Danger of tipping and falling:

-Do not misuse the plinth, drawers, doors etc. as a step or for support. This applies particularly to children.

Danger of food poisoning:

-Do not consume food which has been stored too long.

Danger of frostbite, numbness and pain:

-Avoid lasting skin contact with cold surfaces or refrigerated/ frozen food or take protective steps, e.g. wear gloves. Do not consume ice cream, water ice or ice cubes immediately and do not consume them too cold.

Risk of crushing*

-Do not reach into the soft stop mechanism. Fingers may be trapped when the door is closed.*

Please observe the specific information in the other sections:

 

DANGER

identifies a situation involving direct

 

 

danger which, if not obviated, may

 

 

result in death or severe bodily

 

 

injury.

 

WARNING

identifies a dangerous situation

 

 

which, if not obviated, may result in

 

 

death or severe bodily injury.

 

CAUTION

identifies a dangerous situation

 

 

which, if not obviated, may result in

 

 

minor or medium bodily injury.

 

NOTICE

identifies a dangerous situation

 

 

which, if not obviated, may result in

 

 

damage to property.

 

 

 

 

Note

identifies useful information and tips.

3

Image 3
Contents Operating and installation instructions Contents Appliance at a glanceAppliance at a glance Saving energy General safety informationGeneral safety information ConformityControls and displays Controls and displaysPutting into operation To change the hinges Putting into operationChanging the door hinges To detach the soft stop mechanismWater connection InstallationAll appliances Installing the applianceFitting the unit doors For large unit doors For 600 mm-wide recessFor particle board doors For frame and panel doorsControl ControlDoor alarm Temperature alarmRefrigerator compartment Freezer compartment Shelves Setting the temperature in the freezer compartmentSuperFrost DrawersIceMaker MaintenanceMaintenance Manual defrostingReplacing the interior light Cleaning the applianceCleaning the IceMaker Defrosting with NoFrostCustomer service MalfunctionMalfunction Decommissioning Switching off the applianceTaking the appliance out of service DecommissioningDisposing of the appliance

7084284-03 specifications

The Liebherr 7084284-03 is a high-quality component designed for use in various applications, particularly in the construction and material handling sectors. Known for its reliability and efficiency, this part reflects Liebherr's commitment to robust engineering and innovation.

One of the core features of the Liebherr 7084284-03 is its durability, constructed from premium materials that withstand the rigors of demanding environments. This makes it ideal for heavy-duty applications, whether used in cranes, excavators, or other machinery. The resilience of this component ensures a longer service life, reducing downtime and maintenance costs.

In terms of technology, the Liebherr 7084284-03 integrates advanced mechanical systems designed to enhance operational efficiency. It employs cutting-edge design techniques that optimize performance while minimizing wear and tear. This precision engineering contributes to the smooth operation of machinery, ensuring that tasks are completed efficiently and safely.

The component is also designed with ease of installation and maintenance in mind. Its user-friendly design allows for quick replacements or repairs, which is critical in environments where time is of the essence. Maintenance becomes straightforward, allowing operators to focus more on productivity rather than on equipment issues.

Another notable characteristic of the Liebherr 7084284-03 is its compatibility with a wide range of machinery. This versatility means that it can be integrated seamlessly into existing setups, providing a cost-effective solution for those looking to enhance their equipment's capabilities without extensive modifications.

Moreover, the component is engineered to operate under various environmental conditions, including extreme temperatures and humidity levels. Its performance is tested rigorously to ensure it meets industry standards, giving operators the confidence that it will perform reliably under any conditions.

Overall, the Liebherr 7084284-03 embodies the high standards of quality and innovation that Liebherr is known for. With its impressive features, advanced technologies, and robust characteristics, it stands out as a component that enhances the reliability and efficiency of machinery in the construction and material handling industry. As businesses seek to improve their operational capabilities, components like the Liebherr 7084284-03 are invaluable assets.