Rangemaster U109720 - 01 manual Installation, You will also need the following tools

Page 21

Installation

Dear Installer

Before you start your installation, please complete the details BELOW.

If your customer has a problem relating to your installation they will be able to contact you easily.

Thank you

Installer’s Name

Installer’s Company

Installer’s Telephone number

Regulations

This appliance must be installed by a qualified electrician to comply with the relevant regulations and also the local electricity supply company requirements.

You will need the following equipment to complete the cooker installation satisfactorily Multimeter (for electrical checks)

Cooker levelling tool (provided in pack)

You will also need the following tools:

1.Electric drill

2.Masonry drill bit (only required if ﬁtting the cooker on a stone or concrete ﬂoor)

3.Rawlplugs (only required if ﬁtting the cooker on a stone or concrete ﬂoor)

4.Steel tape measure

5.Cross head screwdriver

6.Flat head screwdriver

7.Spirit level

8.Pencil

9. Adjustable spanner

10. Screws for ﬁtting stability bracket

21

Image 21

Contents Kitchener Installation & Service Instructions U109720Be safe Make sure that the cooker is wired in and switched onElectricity on Peculiar smellsContents Use only pans that are suitable for ceramic hobs HobNever cook directly on the surface Remove the pan from the bottom of the grill compartment GrillOvens To set the time of day ClockTo time something that’s cooking minute minder To stop automaticallyCooking using the timer Auto is showing, you want to reset to manual cookingClock Special Features Both Ovens Main Oven shelvesHandyrack Oven lightTall oven shelves Page Oven cooking guide Grill Cleaning your cookerHob Control Panel and DoorsTall Oven Main OvenSide panels of the main oven can be removed Moving your cooker TroubleshootingLeft hand Main oven not coming on when turned on manually Power failureLeft hand Main oven not coming on when automatic cooking Oven temperature getting hotter as the cooker gets older Cleaning Table Outside of cooker Part Finish Recommended Cleaning Method Ovens Clean only parts listed in this guide General Safety InstructionsTake care that no water seeps into the appliance Speciﬁcation of this cooker should not be alteredDo not use the surface as a cutting board You will also need the following tools InstallationPositioning the Cooker Unpacking the CookerChecking the parts Moving the Cooker LevellingFitting a stability bracket Hotplate Electrical ConnectionOven check Fitting the plinthDoor adjustment Customer careThank you Servicing Notes To Change Grill Controller To Adjust Main Oven Door Catch KeepTo Remove Grill Door To Remove Main Oven DoorTo Change Hotplate Control Taps To Remove or Change a Hotplate BurnerTo Change Hotplate Burner Injector To Change Hotplate Burner ElectrodeTo Change the Main Oven Door Latch To Adjust the Main Oven Door Catch KeepTo Change Tall Oven Door Magnetic Latch To Remove Grill ElementTo Adjust the Oven Door Angle To Remove Oven ElementTo change oven light bulb Dimensions Technical DataRatings Ovens1kW 02kW A21.65kW 56kW Key to circuit diagram Colour Code Page Page 271106