3Com NSR-ORA V3.2 manual OPS Parameters, Recovery Parameters, Parameters with Expert Mode

Page 35

Installation and Configuration

Configuration

OPS Parameters

OPS=yesno

You use this parameter to specify whether or not NSR-ORA will be used under Oracle Parallel Server (OPS).

OPS_INSTANCES

If you are using NSR-ORA under OPS, this parameter contains a list of the names of all computers on which an OPS instance is running (e.g.: psi_1,psi_2).

Recovery Parameters

Finally, two parameters concerning the recovery are to be set:

NSR_MAX_RECOVER

This parameter specifies the maximum number of parallel recoveries of tablespace files. The default value is 10, i.e. a maximum of 10 recovery processes is started in parallel. For devices where the data block between two file marks is larger (e.g. 3590 devices), the value should be larger to ensure an optimum recovery time. If the tape is spooled back and forth several times during a recovery this parameter should be increased. This parameter is only of interest for the Fujitsu Siemens Computers NetWorker Version up to V5.5 (including).

NSR_MAX_REC_DEV

This specified the number of backup devices to be used for a recovery. The value set here should correspond to the number of devices used in a recovery.

Parameters with Expert Mode

Some parameters are not asked for by configure_nsrora but may be changed manually in the dbo${ORACLE_SID}.init configuration file after the skript’s run has completed. In General this is not necessary, but to be complete these para- meters are described below. They serve, first of all, to change default values (e.g. names of ressources created by configure_nsrora) if this is explicitly inten- ded.

AMON_GROUP

Name of the NetWorker backup group for the archiving monitor.

System Administrator’s Guide

U42252-J-Z915-1-76

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Edition October NSR-ORACopyright and Trademarks Boldface AudienceConventions Preface What is New in ReleaseUpdate from Previous Releases Introduction Introduction Physical Database StructureLogical Database Structure Database files Control file Database BackupArchive Mode of the Database Archiving System Administrator’s Guide U42252-J-Z915-1-76Function Scope Function ScopeArchiving Monitor Individual ComponentsTape library Individual ComponentsArchive Database interface NSR-ORA ArchivingExample Starting and Ending the Archiving Monitor# startamon.sh status ora ORACLESIDs ora Subsequent status enquiry generates the following outputFollowing is a representative sample from the log file LoggingIndividual ComponentsThe Backup Component Backup ComponentDatabase interface NSR-ORA Backup Archiving Component Offline Backup of the DatabaseIndividual Components Configuration and management Online Backup of the DatabaseLog files from local backups not for NAS filers Checking backups troubleshootingAmon Recordings Individual Components Quick Start Installation and ConfigurationLicensing NSR-ORA InstallationInstallation and Configuration Installation then continues interactivelyUnix Client is required Installing NSR-ORA from CDIs to be installed Keylic commandRufen Sie folgendes Kommando auf Invoke the following commandLog in as root Set the Display variable HP-UX Use the following command to uninstall NSR-ORA under LinuxUnpack the NSR-ORA.tarfile from the CD ConfigurationHow to Proceed for an Update from an Earlier Version Installation is then with the commandEstablishing tablespace names Example Configuration tool is invoked with the commandPreparations First make sure of the followingChecking the Oracle Administration Program Installation and ConfigurationConfiguring NSR-ORA Oracle Parameters Parameters for configurensroraNetWorker Parameters Directory where Oracle is installedOracle owner Oracle owner groupNow the amon parameters are queried No compression is usedAmon Parameters Mirror OPS Parameters Recovery ParametersParameters with Expert Mode Amonmirrorgroup Defining backup sets save sets It is also recommended generally to carry out a full backup # configurenetworker createdelete Oraclesid Configuring NetWorkerRoot 68 # configurenetworker create ORA2 NSR-ORA in OPS clusters InstallationConfiguration On HP-UX /opt/networker/oracle/bin/startamon.sh NSR-ORA on Linux TroubleshootingBacking Up an Oracle Database Version 8.0 or higher Recovery Component Selecting the Type of RecoveryControl file Database files Recovery Until Time with Logical ErrorsRecovery Automatic Recovery Crash Recovery Manual recovery Performing a recoveryStart orarecut Automatic Recovery for an Optional Point in TimeNew recovery attempt with orarecut can be made Fully-automatic RecoveryRecovery Offline recovery of an offline or full backup Open the database using RecoveryPerforming a recoveryRecover the remaining save sets again For the recovery of an online backup onlyRecovery with Oracle Parallel Server OPS No space left on device OracleRecovery Running NSR-ORA with NAS devices Using NSR-ORA with NetApp FilersNSR-ORA and NetApp PrerequisitesRecommendations Configuring NSR-ORA with NetApp FilersNSR-ORA and NetApp NETAPPSNAPNR=255 Nfssave RSH Name Oraclesidndmp One group for pure snapshot backups Scenario 1 Three Backups per DayName Oraclesidndmp Two groups for pure snapshot backups Scenario 2 Two Backups per DayYou should use /vol/vol0 as the save set Scenario 3 Seven Backups per DayDefining the Ndmp Client Name OraclesidsnapintervalGroups NetWorker ResourcesInterval attribute Clients For Ndmp backups NSR-ORA provides two new save setsNdmp attribute Ndmpoffline client has to be assigned toAmon Client Backup with NSR-ORABackup methods PoolsControl file as an Ascii trace file For online backups the binary control fileInformation and log files of the current backup process Savegrp completion notificationDebugging Recovery with NSR-ORARecover until time orarecut NSR-ORA and NetApp Example 1 Recovery based on the last snapshot Crash Recovery nsrorarecExample 2 Recovery based on a specified snapshot Defining BackupShell parameter DatabaseFor NetApp NetWorker Shell parameter Config.sh OutputFor NetApp Configurensrora IndexInstallation Installing from CD Shell parameter No space left on device error MessageShell parameter Nsrndmpsave command Backup component ComponentsNfssave System Administrator’s Guide U42252-J-Z915-1-76 Configuration Installation on Remarkable thingsShell parameter Orarecut command For NetApp Restore Redolog files OPSOPS Update

NSR-ORA V3.2 specifications

The 3Com NSR-ORA V3.2 is a versatile networking solution designed to enhance connectivity and streamline data management across various enterprise environments. With the rapid evolution of digital communication, 3Com recognized the need for a robust system that caters to the demanding requirements of today's businesses. The NSR-ORA V3.2 is specifically engineered to provide optimal performance, scalability, and reliability.

One of the standout features of the NSR-ORA V3.2 is its integrated network processing capabilities. This device employs advanced multi-layer switching technology that significantly boosts data throughput while maintaining low latency. This is particularly advantageous for organizations that rely on real-time data transmission for critical applications, such as VoIP and video conferencing. The ability to process large volumes of data efficiently ensures that businesses can operate seamlessly without disruptions.

Another key characteristic of the NSR-ORA V3.2 is its support for a wide range of networking protocols. The device is compatible with both IPv4 and IPv6, allowing businesses to transition smoothly to newer network architectures without the need for significant reconfiguration. This dual-stack capability not only enhances network flexibility but also future-proofs investments as organizations look to scale and adapt their digital infrastructure.

Security is at the forefront of the NSR-ORA V3.2's design. The device incorporates advanced security features such as firewall protection, intrusion detection, and secure VPN capabilities. These components work together to safeguard sensitive information and ensure that data integrity is maintained across the network. In addition to these features, the device offers comprehensive management tools, allowing network administrators to monitor performance and manage access controls more effectively.

The NSR-ORA V3.2 also excels in its interoperability with various devices and platforms, making it an ideal choice for enterprises that utilize a mix of legacy systems and modern technologies. Its compatibility with both wired and wireless networks provides businesses with the flexibility to design an infrastructure that meets their specific operational needs.

In summary, the 3Com NSR-ORA V3.2 is a powerful networking solution that combines advanced processing capabilities, robust security features, and a high degree of compatibility with diverse systems. Its emphasis on performance and scalability makes it a compelling choice for organizations seeking to enhance their network infrastructure in an ever-evolving digital landscape.
Top Page Image Contents