Installation instructions

The following instructions are for your installer who should follow them to ensure that your appliance is properly installed, regulated and serviced in compliance with current directives. Important: unplug the appliance from the mains before carrying out any maintenance or regulations.

Installation of the cooker

The cooker is prepared with protection degree against excessive heating of type X, the appliance can therefore be installed next to cabinets, provided the height does not exceed that of the hob. If the cooker is placed touching walls or sides of neighbouring cabinets, these must be capable of withstanding a temperature rise of 60°C above room tempe- rature.

Levelling

The cooker is supplied with adjustable feet to ensure perfect levelling. They can be screwed in the seats positioned in the corners of the cooker base.

Assembling the legs (Fig. A)

Four legs are included to make the cooker 5 cm higher. The legs are assembled under the base of the cooker. To assemble, proceed as follows:

•Front part tilt the cooker towards the back; unscrew feet “A” if already installed. Insert the threaded pin of leg “ B” in the appropriate threaded holes “C”, turn clockwise all the way and the level the cooker by turning the foot of leg “D” clockwise or counter-clockwise.

•Rear part follow the same procedure.

Assembling the base panel (Fig. B)

A base panel is provided for covering the legs. To assemble proceed as follows:

•after assembling the legs, unscrew the 2 screws “E” and

use them to fasten base panel “F”.

N.B.: Never install the base panel before fastening the legs.

Fig. AFig. B

For a correct installation of the cooker the following precautions must be followed:

a)The cooker may be located in a kitchen, a kitonen/diner or bed sitting room, but not in a bathroom or shower room.

b)The furniture units next to the cooker, that is higher than the working boards, must be placed at least 110mm from

the edge of the board. Curtains must not be fitted immediately behind the cooker or within 110 mm. of the sides of the cooker.

c)The hoods must be installed according to the requirements in the hood handbook.

d)Wall cabinets may be fitted in line with the sides of the

base units, providing that		HOOD
base units, providing that
the lower edge of the wall		Min. 500 mm.	min. 650 mm. with hood min. 700 mm. without hood
cabinets is a minimum of	Min. 420 mm.	Min. 420 mm.
420 mm above the worktop.
The minimum distance
combustible material
combustible material
kitchen units can be fitted
directly above the worktop
is 700mm.

e)The wall in contact with the back of the cooker must be of flameproof material.

Electrical connection

Electric cookers come without a power supply cable. The cooker is designed to operate on an electricity supply which conforms to the electrical data shown on the Rating Plate. The cooker can be connected to the mains only after removing the back panel of the cooker itself with a screwdriver.

N.B.: the following installation procedure must be carried out by a qualified electrician. The electrical installation must comply with the IEE Regulations, Building & local By-Lays. For the installation of the feeding cable carry out the following operations:

•unscrew the screws of the cable stop and the three screws

of the contacts L-N- .

•fix the wires in the main cable.

Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow	Earth
Blue	Neutral
Brown	Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

Green & Yellow wire to terminal marked “E” or or

coloured Green or Green & Yellow.

Brown wire to terminal marked “L” or coloured Red. Blue wire to terminal marked “N” or coloured Black.

	230-240 V ~
Brown L	E
Bleu N	Yellow - Green

Cable H05RRF - 3 x 2,5 mm2

•fix the feeding cable in the special cable stop and close the rear cover of the cooker.

N.B.: the power supply cable must have these minimum requirements:

Type: H05RR-F

Section: 3x4 mm2

KG 3044 BE/G, KG 3044 WE/G specifications

The Indesit KG 3044 WE/G and KG 3044 BE/G are highly versatile fridge-freezer combinations designed to meet the varied needs of modern households. With a focus on efficiency and convenience, these models provide ample storage space and innovative features to enhance your culinary experience.

One of the standout features of the KG 3044 series is its energy efficiency. Both models come with an impressive A+ energy rating, ensuring that they consume less power while maintaining optimal cooling performance. This not only helps in reducing electricity bills but also minimizes the environmental impact, making them a responsible choice for eco-conscious consumers.

The fridge compartment of these models is designed for maximum usability. It offers a spacious interior with multiple adjustable shelves, allowing you to customize the layout according to your storage needs. The transparent vegetable drawers are an ergonomic addition, conveniently placed for easy access to your fresh produce while keeping it organized. The interior lighting ensures that you can see everything clearly, even in low-light conditions.

Another key feature is the frost-free technology in the freezer compartment. This innovation eliminates the need for manual defrosting, as it prevents ice build-up, ensuring that you have hassle-free access to your frozen foods. The KG 3044 models also boast fast-freeze capabilities, allowing users to rapidly freeze their perishables to lock in freshness and nutrients.

In terms of design, the Indesit KG 3044 WE/G presents a classic white finish, while the KG 3044 BE/G features a sleek black exterior. Both designs are modern and stylish, complementing any kitchen décor. The external dimensions are carefully crafted to fit comfortably within standard kitchen spaces without sacrificing internal capacity.

Additionally, the adjustable temperature controls in both fridge and freezer compartments allow users to set the perfect climate for different types of food, which is crucial for preserving freshness. The low-noise operation adds to the convenience, ensuring that these appliances do not disturb your daily activities.

In summary, the Indesit KG 3044 WE/G and KG 3044 BE/G models offer a blend of functionality, energy efficiency, and modern aesthetics. With features like adjustable shelves, frost-free technology, and convenient temperature controls, these fridge-freezer combinations provide an efficient solution for all your refrigeration needs while enhancing your kitchen environment.