Care and Cleaning
COOKER FINISH | CLEANING METHOD |
|
|
Vitreous Enamel |
|
Hotplate, pan supports, | Cloth wrung out in warm soapy water. Stubborn |
hotplate front trim, | stains can be removed with a cream paste, |
burner caps, roasting dish, | liquid cleaner or by rubbing with fine steel wool |
grill pan, main oven base, | soap pads. |
inside of grill compartment, | Check that the cleaning agent is approved by the |
inside of doors. | Vitreous Enamel Association. |
|
|
Paint |
|
Side trims, plinth, fascia | Wash with a cloth wrung out in warm soapy water |
bottom trim, fascia end | only. |
caps, side panels, door | DO NOT USE ABRASIVES. |
handles. |
|
Aluminium | Similar to paint cleaning above. Use a nylon brush to |
Hotplate side trims, hotplate | |
burner bodies, lid rear trim, | remove any cleaning materials, water or dirt from the |
rear flue grille. | hotplate burner bodies. |
|
|
Glass | As for enamel cleaning. Polish with a clean dry cloth |
| or kitchen roll. |
|
|
Chromium Plating |
|
Oven shelves, grill pan grid, | Wipe with a cloth wrung out in warm soapy water. |
grill pan handle support | A fine steel wool soap pad e.g. Brillo, Ajax, or a |
| chrome or stainless steel cleaner may be used. |
|
|
Plastic | Wipe with a cloth wrung out in warm soapy water. |
Grill pan handle, control | |
knobs | Stubborn stains can be removed with a cream |
| cleaner. |
|
|
REPLACEMENT OF OVEN LIGHT BULB
CAUTION: DISCONNECT THE APPLIANCE FROM THE ELECTRICITY SUPPLY BEFORE REPLACING THE LAMP TO AVOID THE POSSIBILITY OF AN ELECTRIC SHOCK
Light bulbs are not covered by the manufacturer’s guarantee.
A new 15W, 300˚C rated SES bulb can be obtained from your cooker supplier or any major electrical retailer.
1.Remove the shelves from the oven.
2.Unscrew the lens using a thick cloth to protect your fingers in the unlikely event of a lens fracture.
3.Unscrew bulb.
4.Fit new bulb and refit lens.
24