Indesit KD643G, KD641G, KD640G manual Installation and Operational Checks

Page 34

Installation Instructions

INSTALLATION AND OPERATIONAL CHECKS

After installation, check for gas soundness. The supply pressure can be checked at the grill injector. Access to the injector is by first removing the baffle at the front of the grill fastened by two screws. Then remove the fastening screw on the right hand side of the burner and slide the burner off the injector. Ensure that the grill burner is correctly located under the fixing screw on reassembly.

Fit the hotplate burner bodies and caps, pan supports and shelf shield(s). Referring to the instructions for use where necessary,

1.Check that the hotplate and grill burners ignite correctly and burn with a steady flame. Check for a steady flame on the low setting.

2.Check that with the main oven set to mark 9, the burner ignites at low rate, and then increases to full rate within 60 seconds. Leave the oven full on with the door closed for 10 minutes, and check that when the control is turned to the ‘Slow Cook’ setting that the flame reduces.

3.Check that with the top oven set to mark 8, the burner ignites at low rate, and then increases to full rate within 60 seconds. Leave the oven full on with the door closed for 10 minutes, and check that when the control is turned to mark 1 that the flame reduces.

4.Check the operation of the oven timer and oven light(s).

Instruct the user on operation of the cooker.

NOTE - Models KD643G and KD641G only: It is normal for a slight resistance to be felt when turning the Top Oven/Grill control to the oven settings, as the control operates a flap at the rear of the cooker.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Free Standing Gas Cooker Contents Introduction Safety Information AlwaysNever Automatic Cooking Oven Timer Operation KD643G onlyGuidance on Automatic Cooking Know your Timer KD643G only ClockfaceSetting the Time of DAY Auto Cooking Programmes Page Other Notes on Timer Operation Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireTo USE the Grill GrillRelighting the Burner Grill Main Oven Main Oven Cooking Chart Meat and PoultryYeast Mixtures ‘Slow Cook’ Setting Using the ‘SLOW COOK’ Setting for Slow CookingTop Oven KD643G and KD641G only Guidance on Using the TOP OvenTo USE the TOP Oven Top Oven Cooking Chart KD643G and KD641G only Gas Shelf Food Mark Main Oven Heat Clean Linings Care and CleaningOven Shelf Supports Cooker Finish Cleaning Method Replacement of Oven Light BulbSide Opening Doors Drop Down DoorsProblem Check Something Wrong with your Cooker?Recommended setting slightly to suit your taste Location Installation InstructionsGAS Safety Installation & USE Regulations Provision for VentilationGeneral Technical Data DimensionsNatural GAS Space for Fixing Cooker HoodsLevelling Unpacking the CookerStability Bracket Connecting to GAS Supply Installation Instructions Electrical Connection Connect to a 230-240V A.C. Supply onlyInstallation and Operational Checks Contact the Service Office UK 08709 066 If It Still Won’t WorkKey Contacts
Top Page Image Contents