Indesit FID20 Mk2, FIDM20 Mk2 manual General, Ventilation, Final Installation, List of loose items

Page 43

Installation

Important

It is essential that the lower cupboard is constructed in the manner illustrated i.e. having side, back, and roof panels so joined as to provide no apertures which could permit access to the oven unit when installed.

1. General

The appliance is designed for mounting at a safe level into an oven housing which must be secured to the backing wall.

2.Ventilation

a.The oven housing unit cabinet dimensions must comply with fig. 4.

b.An air gap of 50mm minimum must be provided at the rear of any top or bottom cupboards or shelves (see fig. 1).

c.It is necessary that the cabinets are provided with unobstructed ventilation, i.e. from adjacent cabinetry. This can be done by either raising the base of the cabinets using the adjusting feet (or spacers) or alternatively by providing a slot in the cabinet plinth to the dimensions in fig. 1.

d.The air gap at rear allows the warmed air to pass out of the inner cabinet space. Where it is intended to fit cupboards above the oven unit to ceiling height, it is essential that the warmed air is exhausted through the front of the cabinet (see fig. 1).

e.If an oven unit is installed adjacent to a tall cabinet, steam escaping from the oven when the door is opened could condense on and maybe stain the adjacent surface. To prevent permanent staining, the adjacent surface should be made of a material that is heat resisting and easy to clean. Adjacent tall cabinets should not be deeper than the oven housing cabinet.

3.Final Installation

a.Using a spirit level, check that the housing cabinet is level from side to side and from front to back in its installed position.

b.Correct any unevenness by placing spacers under the bottom of the cabinet. Make sure that the cabinet rests firmly on the floor without rocking.

c.Before the oven is fitted, the cabinet must be firmly secured to the backing wall for stability.

d.The oven unit should now be lifted (this is a two person lift) into the cabinet and pushed fully home.

e.Finally, the oven is secured to the cabinet by means of the four Phillips C/SK Head screws - two through each side trim.

f.Remove all packaging material from the grill and oven interior.

List of loose items:

4 x Phillips C/SK Head No. 6 x 25mm screws.

42

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Electric built in Double oven Contents Introduction Safety Advice Safety InformationAlways Safety Information Never Become hot Features FID20 onlyFeatures FIDM20 only Oven Temperature Conversion ChartDescription Function Controls FID20 onlyControls FIDM20 only Grill Setting ControlMultifunction Selector Switch FIDM20 only Automatic Oven Timer OperationCooking Clockface Know Your TimerSymbols Timer Function ButtonsSetting the Minute Minder Setting the Time of DAYAuto Cooking Programmes Electronic Clock and Automatic Oven Timer Operation Other Notes on Timer Operation Step Grill Pan and HandleGrill Pan, Food Support Grilling NotesTop Oven Shelf Positioning for Grilling Min = Low, max = High Operation when using the Top Oven for GrillingGrill control example Step Conventional Grilling Grill controls example Step FIDM20Shelf Positioning Using the Top Oven as a Convection OvenOperation when using the Top Oven as a Convection Oven Top Oven Utensils Never use the grill setting control a when warming platesTop Oven Cookery Notes Plate WarmingPre Oven Temperature Charts BakingTop Oven Cooking Fan Oven Cooking Food Time in minsTop Oven Cooking Oven Temperature Charts MeatMain Oven Fan Grilling FIDM20 only TemperaturesGeneral Recommendations Main Oven Fan Grilling Roasting Chart FIDM20 only Operation to Assist in Defrosting Using the Main Oven for Other FunctionsFAN only Setting OnlyFan FIDM20 and FID20 Light only SettingFood should not be placed on the floor of the oven Operating ProcedureMain Oven Convection Oven FIDM20 only Main Oven Fan Oven All ModelsOven Positions Main Oven Fan Oven Cookery NotesTo prepare meat and poultry for Roasting in your Fan Oven Temperature and TimeFrozen Meat and Poultry Meat Pre Main Oven Temperature ChartBeef Baking Conventional Oven FIDM20 only Fan Oven Main Oven Grilling FIDM20 only Grilling ProcedureCleaning Care and CleaningHow catalytic oven liner works Grill Pan, Meat Pans & Oven Shelves Cleaning GRILL, TOP Oven and Main OvenStainless Trims SS models only Oven DoorsControl Panel Inner Door Panels & GlassHOW to Clean the Lamp Lens Replacement of the Oven LampRemove the door inner glass as follows Cleaning the DoorsRefit the door inner glass as follows All cases adhere to routing details see fig InstallationElectrical Requirements Electrical ConnectionsList of loose items Final InstallationGeneral VentilationTall Cabinet Ventilation 595mm If Something Goes Wrong? Problem CheckIf It Still Won’t Work Contact the Service Office UK 08709 066Key Contacts

FID20 Mk2, FIDM20 Mk2 specifications

The Indesit FIDM20 Mk2 and FID20 Mk2 are two standout models in the Indesit range of dishwashers, designed to meet the needs of modern households while ensuring high efficiency and ease of use. Both models embody the brand’s commitment to offering reliable and innovative kitchen appliances that streamline daily chores.

One of the main features of the Indesit FIDM20 Mk2 is its Energy Efficiency Class, which is rated A+. This rating indicates that the machine operates with minimal energy consumption, making it not only eco-friendly but also cost-effective for the user. The FID20 Mk2 shares this energy rating, ensuring that both models help save on utility bills while maintaining excellent washing performance.

The FIDM20 Mk2 incorporates a unique "Push&Go" function. This feature allows users to start the dishwasher with a simple touch of a button, eliminating the need for complicated settings and making the machine user-friendly for everyone. The FID20 Mk2 offers a more straightforward control panel, ensuring that even those who are new to using dishwashers can operate it seamlessly.

Both models offer a variety of washing programs, catering to different types of dishes and levels of dirt. The Fast&Clean program is particularly noteworthy as it enables users to wash lightly soiled dishes in just 25 minutes, perfect for those moments when time is of the essence. Additionally, the Eco Cycle is designed to provide efficient cleaning while using minimal water and energy.

The design of the Indesit FIDM20 Mk2 and FID20 Mk2 features a spacious interior, capable of accommodating up to 13 place settings. This capacity makes them ideal for families or those who frequently entertain guests. Furthermore, the adjustable top basket allows users to maximize space for taller items, enhancing the overall versatility of the dishwasher.

For individuals concerned about hygiene, both models are equipped with a sanitizing wash option that ensures dishes are not just clean but also disinfected. This feature is especially essential in the context of food safety standards.

In summary, the Indesit FIDM20 Mk2 and FID20 Mk2 dishwashers showcase a blend of efficiency, functionality, and user convenience. With features such as energy-efficient performance, versatile washing programs, and increased capacity, these models are well-suited for today’s busy households, making them a reliable choice for effortless kitchen cleaning.
Top Page Image Contents