Electrical
Wiring Color Code
Electrical Circuit Identification
Standard lighting for all models will be fluorescent lamps located within the case at the top.
The switch controlling the lights and heaters are located within an access panel on the side of the case.
Field Wiring and Serial Plate Amperage
Field Wiring must be sized for component amperes printed on the serial plate.Actual ampere draw may be less than specified. Case amperes are listed on the wiring diagram, but due to parts availability they may vary slightly. Always check the serial plate for the actual loads.
Ballast Location
Ballast | Ballast |
(one for each light) |
|
Control Panel
RHR-HEX 6' & (4')
Ballast | Ballast |
(one for each light) |
|
BEFORE SERVICING |
|
|
|
|
|
|
|
ALWAYS DISCONNECT ELECTRICAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
POWER AT THE MAIN DISCONNECT |
|
|
|
|
|
|
|
WHEN SERVICING OR REPLACING ANY |
|
|
|
|
|
|
|
|
| Panel |
| ||||
ELECTRICAL COMPONENT. |
|
|
| ||||
|
|
| Control |
| |||
This includes (but not limited to) Fans, Heaters |
|
|
|
| Ballast for shelves |
| |
|
|
|
|
|
|
| |
Thermostats, and Lights. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
Scale = 1/2"