John Lewis JLBIDW 1201 Water connection, Fixing to the adjacent units, Water inlet connection

Page 25

During all operations that involve accessibility to internal components the appliance must be unplugged.

Be sure that once the appliance has been installed, it is easily accessible for the service engineer in the event that a repair is required.

Therefore make sure, that the counter it is fixed under, is suitably secured to a fixed structure (e.g. adjacent kitchen unit cabinets, wall).

Fixing to the adjacent units

The appliance must be secured against tilting.

Water connection

Water inlet connection

This appliance must be connected to a cold water supply.

For making the connection itself, the coupling nut fitted to the appliance inlet hose is designed to screw onto a 3/4" gas thread spout or to a purpose made quick-coupling tap such as the Press-block.

The water pressure must be within the limits given in the ‘Technical data’. Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected.

The appliance features inlet and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks.

If the appliance is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system. This appliance complies with the applicable plumbing regulations.

Caution! Do not use inlet and drain hoses which have previously been used on another appliance.

Water drain connection

The end of the drain hose can be connected in the following ways:

•To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the appliance.

•To a stand pipe provided with venthole, minimum internal diameter 4 cm.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Jlbidw 1201 Dishwasher Installation Important safety informationGeneral safety Child safetyMaintenance and cleaning Service Correct useEnvironmental information Ecological hintsContents Detergent dispenser Description of the applianceRinse aid dispenser Start/Cancel button IndicatorsPress this button to switch on or off the appliance Control panelSetting mode Programme indicators a and BAcoustic signals Only one programme indicator is onWashing programmes Activating the acoustic signalsWater softener When the appliance is first installedSetting electronically Setting manuallyFilling with rinse aid Filling with saltDaily use Adjusting the rinse aid dosageLoading cutlery and dishes Start the washing programmeLower basket Upper basket Cutlery basketFor taller items, the cup racks can be folded upwards Use of detergent Adjusting the height of the upper basketFill with detergent Using combi detergent tabletsFill the salt container and the rinse aid dispenser Select and start a washing programme Cancelling the washing programmeStarting the washing programme Interrupting a washing programme in progressCleaning the filters Maintenance and cleaningUnloading the appliance Never use abrasive products, scouring pads Cleaning the applianceSomething not working Frost precautionsProlonged periods of non-operation Moving the applianceMalfunction Possible cause Possible solution Make sure that an incorrect Installation Technical dataLevelling of the appliance UnpackingFixing to the adjacent units Water connectionWater inlet connection Water drain connectionMax 85 cm Electrical connection Spare parts Repairs after sales serviceMod Page Page Page 156954030-A-022011 Subject to change without notice

JLBIDW 1201 specifications

The John Lewis JLBIDW 1201 is a standout in the market of high-performance dishwashers, combining efficiency with modern technology to meet the demands of today’s households. This appliance is designed to not only ease the burden of dining cleanup but also to provide a sustainable and user-friendly experience.

One of the main features of the JLBIDW 1201 is its impressive energy efficiency rating, which ensures that it operates with minimal energy consumption while delivering optimal washing performance. This makes it an environmentally friendly choice for consumers seeking to reduce their carbon footprint and lower utility bills. The dishwasher operates quietly, with noise levels reaching as low as 42 decibels, allowing users to run cycles without disrupting the household atmosphere.

The JLBIDW 1201 boasts multiple wash programs, including eco, intensive, and quick wash settings, catering to various cleaning needs. The eco mode is particularly notable, as it optimizes water and energy usage while still delivering a thorough clean, making it an excellent choice for everyday dishes. The intensive mode is perfect for heavily soiled pots and pans, while the quick wash option is ideal for those in a hurry.

Another key characteristic of the JLBIDW 1201 is its spacious interior, which can accommodate up to 12 place settings. The adjustable racks and foldable tines provide versatility and maximize loading capacity, while ensuring delicate items remain secure during the wash cycle. The top rack is designed to handle larger utensils and smaller items, adding further convenience for users.

This dishwasher includes advanced technologies such as a soil sensor, which intelligently adjusts the wash cycle duration based on the level of soil detected on dishes. Additionally, the appliance is equipped with a delay start feature, allowing users to schedule operations during off-peak hours. This not only saves energy but also enhances convenience, as dishes can be washed at a time that suits the user's lifestyle.

For users concerned about water usage, the JLBIDW 1201 employs a smart water management system, ensuring optimal water flow that reduces waste. The appliance also features an easy-to-use control panel with a digital display, providing clear information on cycle status and remaining time.

In conclusion, the John Lewis JLBIDW 1201 is a remarkable dishwasher that embodies efficiency, versatility, and modern technology. With its user-friendly features, quiet operation, and environmentally conscious design, it is an ideal choice for families and individuals alike. Whether you are dealing with everyday tableware or the aftermath of a dinner party, the JLBIDW 1201 promises to deliver exceptional cleaning performance with ease and reliability.
Top Page Image Contents