10. Multi tab button
This appliance is equipped with the “Multi tab” function, that allows the use of the combi detergent tablets with a combined cleaning, rinsing and salt function (“3 in 1”,“4 in 1” etc...).
Before using the “Multi tab” function, check that the water hardness level in your area complies with the detergent manufacturers recommendations.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated.
Select the “Multi tab” function before the set of a washing programme.
Once selected this option (Multi tab back light illuminated) it will remain active also for the following washing programmes. To deactivate the function, press the button (Multi tab back light off).
With the use of the “Multi tab” function, the cycle durations may change. In this case, in the digital display, the indication of the running time of the programme is automatically updated.
NOTE: Once the programme is running, the “Multi tab” function can NO longer be changed. If you want to exclude the “Multi tab” function you have to cancel the programme setting (see chapter "Starting a washing programme" - "Cancel a washing programme in progress") and then deactivate the “Multi tab” function. In this case you have to set a washing programme (and desired options) again.
NOTE: if the drying results are not satisfactory we suggest that you activate the rinse aid dispenser.
The activation/deactivation of the rinse aid dispenser can only be possible with the “Multi tab” function active.
Activation/deactivation of the rinse aid dispenser
The dishwasher must be switched off
When the rinse aid dispenser has been activated, the rinse aid indicator light on the control panel is automatically activated.
1.Press the On/Off button.The On/Off indicator light and all the programme indicator lights will illuminate (setting mode). If only one programme button indicator light is on, this means that a washing programme is set.The programme must be cancelled: press simultaneously function buttons 1 and 2 for about 2 seconds.All programme indicator lights will illuminate indicating that the set programme has been cancelled and the machine is now in setting mode.
2.Press simultaneously function buttons 1 and 2, until the indicator lights of function buttons 1, 2 and 3 start flashing.
3.Press function button 2, the indicator lights of function buttons 1 and 3 turn off while the indicator light of function button 2 goes on flashing, the digital display indicates the current setting.
Rinse aid dispenser deactivated
Rinse aid dispenser activated
4.To change the setting, press function button 2 again, the digital display indicates the new setting.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button.
11. Half load button
This option is useful and economical when only a small load needs washing reducing the consumption of water and energy. This option must be linked to the selection of a washing programme. (Programmes with this option are indicated in the "Washing programmes" chart on page 20).
When selected, a back light will illuminate "Half load". Load the dishes into both baskets (upper basket and lower basket).
When using this option we recommend to reduce the dose of detergent that is normally used for a complete load.
11