John Lewis JLDWW 905 instruction manual Something Not Working, Flashing fault code appears

Page 24

Something Not Working

If the dishwasher is not working correctly, please carry out the following checks, before contacting your local Service Force agent.

Important! If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

...a flashing fault code appears

The dishwasher will not start or stops during operation and a sequence of intermittent audible signals are heard. The intervention of an alarm is indicated by:

-the continuous flashing of the indicator light of the running programme,

-a fault code (as described in the chart) is visible in the digital display. Open the door and carry out the following suggested corrective actions.

 

Sympton

Possible cause

Solutions

-

in the digital display

The water tap is blocked or furred with

Clean the water tap.

limescale.

 

 

appears

The water tap is turned off.

Turn the water tap on.

 

 

The machine does not fill with water.

The filter (where present) in the threaded

Clean the filter in the threaded hose fitting.

 

 

 

 

hose fitting at the water inlet valve is

 

 

 

blocked.

 

 

 

The water inlet hose has not been correctly

Check the water inlet hose connection.

 

 

laid or it is bent or squashed.

 

-

in the digital display

The sink spigot is blocked.

Clean out the sink spigot.

 

appears

The water drain hose has not been

Check the water drain hose connection.

 

 

The dishwasher will not drain.

correctly laid or it is bent or squashed.

 

-

in the digital display

Anti-flood device has activated.

Close the water tap and contact our extended warranty

 

appears

 

administrators, refer to Repairs - After Sales Service on

 

 

 

page 25.

Once the checks have been carried out, close the door and press the button of the programme that was running before the intervention of the alarm.The programme will continue from the point at which it was interrupted. If the fault code reappears or if another fault code not described above appears contact our extended warranty administrators, refer to Repairs - After Sales Service on page 25.

Attention: once having verified which kind of malfunction has occurred, before carrying out the checks the appliance MUST be switched off.

...there are problems when operating the dishwasher

Symptom

Possible cause

Solutions

 

 

 

 

The dishwasher door has not been properly closed.

Close the door.

The programme does not start

 

 

The main plug is not plugged in.

Insert the mains plug.

 

 

 

 

 

The fuse has blown in the household fuse box.

Replace the fuse.

 

 

 

 

Delay start has been selected.

If dishes are to be washed immediately, cancel

 

 

the delay start.

 

 

 

There is a whistling noise during

The whistling is not a cause for concern.

Use a different brand of detergent.

washing

 

 

 

 

 

24

Image 24
Contents Jldww 905 compact dishwasher Installation Child safetyUse This appliance is designed to be operated by adultsMaintenance and cleaning Service Materials marked with the symbol are recyclableEcological hints Environmental informationContents Description of the Appliance Control panelRating plate FiltersInstallation Technical specificationsUnpacking Water supply connectionsWater outlet hose connection This case, this kind of facility is not possiblePlinth on free-standing appliances is not adjustable Fitting under a counterLevelling Kitchen worktop or sinkElectrical connection Permanent connectionOn/Off indicator light On/Off buton Function buttons Control indicator lightsDelay start button Control PanelDishwasher must be switched off Multi tab buttonHalf load button Activation/deactivation of the rinse aid dispenserBefore using your dishwasher for the first time Water softenerSetting manually Setting electronicallyFilling with dishwasher salt To fillAdjusting the dose Rinse aidFilling with rinse aid Open the container byUsing the Dishwasher Loading cutlery and dishesStart the wash programme Not suitableLower basket Cutlery basketCutlery allow it Adjusting the height of the upper basket Upper basketTo move to the higher position proceed as follows So they do not moveUse of detergent Fill with detergentClose the lid and press until it locks in place Different kinds of detergent Concentrated detergentDetergent tablets Use of combi tablet detergentsWashing Programmes AnyPartial load to be Day or whenTo cancel a delay start Setting and starting the programme with the delay startTo interrupt or cancel a washing programme in progress Cancel a washing programme in progressEnd of the washing programme Unloading the dishwasherMaintenance and Cleaning External cleaningCleaning the filters Frost precautionsFlashing fault code appears There are problems when operating the dishwasherSomething Not Working Repairs After Sales Service Dishes are not cleanWash results are not satisfactory Spare PartsPage Page 03/06 152951 89/0

JLDWW 905 specifications

The John Lewis JLDWW 905 is a modern dishwasher that has become increasingly popular with homeowners looking for efficiency and convenience in their kitchens. This model combines an aesthetically pleasing design with innovative technology, making it a great choice for families and individuals alike.

One of the standout features of the JLDWW 905 is its large capacity, which can accommodate up to 13 place settings. This makes it ideal for larger households or for those who entertain frequently. The flexible interior layout includes adjustable racks and folding tines, allowing users to customize the space according to their needs, whether it’s stacking larger pots and pans or fitting in delicate glassware.

The JLDWW 905 incorporates advanced washing technologies to ensure that dishes come out sparkling clean every time. It is equipped with a powerful spray arm system that delivers superior water coverage, reaching all corners of the dishwasher. Additionally, the model features multiple washing programs, including eco, intensive, and quick wash options. The eco setting is particularly noteworthy since it uses less water and energy, making it an environmentally friendly choice.

Noise reduction is another key characteristic of the JLDWW 905, operating at a quiet 44 dB. This makes it perfect for open-plan living spaces or for running late at night without disturbing family members or guests.

The dishwasher also comes with a user-friendly control panel that includes a digital display for easy program selection. It features a delayed start option, allowing users to set the dishwasher to run at a time that’s most convenient for them. The built-in water softener enhances cleaning performance, especially in areas with hard water, preventing limescale buildup.

Moreover, the John Lewis JLDWW 905 is rated ‘A++’ for energy efficiency, contributing to lower utility bills and a reduced carbon footprint. The stylish design, available in a sleek white or stainless steel finish, ensures that it complements a variety of kitchen aesthetics.

In conclusion, the John Lewis JLDWW 905 is a top-tier dishwasher that offers a combination of practicality, advanced technologies, and energy efficiency. Its user-friendly features and high cleaning performance make it a great investment for anyone looking to simplify their kitchen duties while maintaining a commitment to sustainability.