The 1" transducer used on the Super Thirty II emits a 32 degress cone angle. This wider beam is used in shallow water since it provides a wider area of coverage.

NOTE: While the 1" transducer is recommended for the Super 3011, some may prefer the performance of the 2" transducer. Either will work and it may be a matter of personal preference as to which one is used.

TRANSDUCER SWITCH ASSEMBLIES FOR MODELS TS1-3 AND TS2-3

The Transducer Switch Model TS1-3 comes complete with one switch and one extension cable. This switch allows you to use one Humminbird depth sounder with two transducers and is ideal when using one transducer mounted on the transom and the other transducer mounted on your trolling motor.

The transducer switch model TS2-3 comes complete with one switch and two extension cables. This switch allows you to use two Humminbird Depth Sounders with a single transducer, mounted anywhere feasible for your application.

NOTE: With switch in this position depth sounder operates from Transducer #2.

We recommend the use of our new Swivel Mount SM-4 (not shown) in conjunction with our TS1- 3.

Page 21
Image 21
Humminbird manual Transducer Switch Assemblies for Models TS1-3 and TS2-3