ELECTRICAL HOOKUP
HOW TO ACCESS BALLASTS
This display case is equipped with specially designed light reflectors in the cornice to improve the illumination of products. Electronic ballasts operate both the cornice and shelf lights and are located behind the reflectors.
To gain access to the ballasts the reflectors may be easily removed be removing a several screws along the length of the reflector. See below.
| BALLAST |
| REFLECTOR |
SCREWS | LAMP |
| |
CROSS SECTIONAL VIEW OF CORNICE LIGHT AREA | |
REMOVE SCREWS
4
1
2
3
1.Remove lamps by pulling down at both ends.
2.Remove screws along length of the reflector.
3.Reflector is now free to remove.
4.Ballasts are located behind.
5.To replace, reverse procedure. First insert reflector in front channel then replace the screws in the reflector.
10