John Lewis JLFFS2002 manual Installation, Unpacking, Positioning, Ventilation, Levelling

Installation

Unpacking

Remove all transit packaging.

Positioning

The appliance should be located in a well-ventilated, dry room. To ensure correct operation the appliance should:

• Not be exposed to direct sunlight. Fig. 1

•Not be installed next to radiators, cookers or other sources of heat.

•Only be installed in a location where the ambient temperature corresponds to the climate classifica- tion for which the appliance is designed.

The climate classification can be found on the rating plate, which is located on the bottom, left hand side of the fridge compartment. The table shows the correct operating ambient temperature for each climate class. (Fig 1)

Fig. 2

Climate Classification	Ambient Operating Temp.
SN	+10 to +32°C
N	+16 to +32°C
ST	+18 to +38°C
T	+18 to +43°C

If the temperature rises above or falls below the stated ambient temperature for the climate class, the opera- tion of the appliance may be affected.

Ventilation

You should also ensure that air can circulate freely around the back and the top of the cabinet. Assemble the spacers, which you can find in the Instruction Booklet bag, in the condenser as shown in figure 2.

rating plate

Always ensure that the ventilator grill at the front of the appliance is kept clear of any obstruction. (see fig. 3 )

Levelling

Level the appliance by turning the 2 adjustable feet at the front of the appliance. The appliance must be level to prevent vibration and excessive noise and to ensure the doors shut correctly. (Fig 4)

Fig. 3

Fig. 4

13