S Ta L L At I O N | Marvel Industries 6SBARE guide

I N S TA L L AT I O N

Select Location

The proper location will ensure peak performance of your appliance. Choose a location where the unit will be out of direct sunlight and away from heat sources. Best performance will be maintained when installed within the following parameters:

Ideal Ambient Temperature Range

Built-in	65°–	80°F
Free-Standing	65°– 90°F

Cabinet Clearance

Ventilation is required from the bottom front section of the unit. Keep this area open and clear of any obstructions.

figure 1

Electrical Connection

Use nominal 115 volt, 60 cycle AC only. DO NOT

USE AN EXTENSION CORD.

Grounding Method

This product is factory equipped with a power supply cord that has a three-pronged, grounded plug. It must be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and applicable local codes and ordinances (see figure 1). If the circuit does not have a grounding type receptacle, it is the responsibility and obligation of the customer to exchange the existing receptacle in accordance with the National Electrical Code and applicable local codes and ordinances. The third ground prong should not, under any circumstances, be cut or removed. (See figure 2) All U.L. listed refrigerated products are equipped with this type of plug.

figure 2