Marvel Industries 6SBARE specifications E R At I O N

O P E R AT I O N

figure 3

Start Your Appliance

Your appliance will start upon initial plug-in. The LED will flash amber upon initial plug-in due to your unit being powered-on at the factory to verify performance and then powered-off. The Sentry system senses a power outage has occurred and relays this information to you when you initially power-up your appliance. This is normal and pressing the “ON/OFF” button will reset this alarm function.

If your appliance’s control has been shut-off i.e., unit plugged in, interior lights operate, display blank, unit must be turned on. To turn on your appliance, push and hold for 5 seconds, the “ON/OFF” button located on the display panel. (See figure 3) Once loaded with wine bottles, allow at least 48 hours for the unit to stabilize before making any adjustments to the initial setting.

Set Your Temperature Mode

This product can display either Fahrenheit or Celsius. To do this press the ”°F/C“ button on display panel.

Set the Controls

The available temperature range of the unit is from 40° to 65°F. The temperature set-point is initially set in the factory at 43°F. The temperature set-point can be lowered or raised by first pushing the “Set” button on the display pad. A “SET” icon will be displayed. This icon will turn off 10 second after completing your adjustments. Pushing either the “Warmer” or “Colder” buttons located on the inside of the unit on the display pad will raise or lower the set temperature by one degree F or C (depending on your setting). As with any refrigeration product, there is a slight temperature variance at different locations within the cabinet.

Adjustable Temperature Control

The temperature control is fully adjustable from 40° to 65°F. The range allows flexibility of temperature preferences and provides the ideal wine aging, storing and serving temperatures. Temperature range will average between 50 to mid 60’s in the upper section and 40 to 50’s in the lower section. Adjusting the “Warmer” or “Colder” buttons will affect both zones accordingly. The display temperature will be reflective of temperatures in the

middle section of the unit. See “Loading Tips and Suggestions” on the next page for information regarding glass shelf and wine rack configuration.

Interior Light and Switch

The interior light makes it easy to view your wine labels and enhances the display of your collection. To engage the display light, press the “Light” button on the display panel. The light will come on and stay on with the door closed. To disable the display light, press the “Light” button again. The light will always come on when the door is opened.

Warning Alarms

Your beverage center has been fitted with a Sentry system. This sentry will let you know if your unit is not functioning properly for optimum wine storage.

Door Ajar Alarm

If the door has been left open for over 5 minutes the alarm will sound and the LED will flash green. This will stop as soon as the door is closed.

High and Low Temperature

If your unit reaches temperatures outside normal operating temperatures for your set point for about one (1) hour duration, an alarm will sound and the LED will flash red. This will warn you that your wines have seen temperatures that may not be conducive for long term storage.

Power Failure

If your unit experiences a power failure the LED will flash amber until the alarm is reset.

Reset Alarms

Press the “ON/OFF” button for approximately one second. This will reset all audible and display alarms.

Sabbath Mode
Your appliance is equipped with a Sabbath mode.
By activating this mode you will be disabling all
displays, audible alarms and lights. The system will
be overridden with a random control. To activate the
Sabbath mode press and hold the “Set” button while
pressing the ”°F/C“ button 7 times within 7 seconds.
To disable the Sabbath mode repeat the process.
The Sabbath mode will deactivate after 96 hours.	4