A P P L I A N C E F E AT U R E S
5
Insert Wine Bottles
The wine rack
Loading Tips and Suggestions
The glass shelves and fixed position wire rack are for general beverage storage, such as beer and soft drinks. Opened wine bottles and tall beverage containers may be stored on the glass shelf closest to the cabinet top. Just lift the hinged section of the fixed position upper wire rack to provide clearance for the bottles and/or containers to stand upright.
The wooden, bottom bottle cradle may be removed for storing “jug” wines. Just remove the two screws that secure the cradle to the cabinet floor.
You can store magnum bottles and other large bottles on any of the shelves (except for the top shelf) by removing the shelf directly above them or placing the shelf at a position allowing for proper clearance.
Commodities on the top rack directly under the light will be exposed to a slightly higher temperature when the light is on. REMEMBER TO TURN OFF THE LIGHT WHEN IT IS NO LONGER NEEDED.
Keep wines that you plan to use for everyday drinking and entertaining on the front half of the racks where labels are completely visible. Place wines for aging or longer term storing in the rear.
Roll-out Shelves
The
Wine Rack
Because bottles are not stacked on top of each other, you can easily view and access your inventory without disturbing other bottles. (See figure 6)
Front Bottles (Necks Facing Rear) | Rear Bottles (Necks Facing Front) |
figure 4
figure 5
figure 6