Oregon HT255 General Operation, Inserting and Releasing Battery Pack, Operating Temperature, Grip

OREGON® CORDLESS TOOL SYSTEM
	OPERATING THE HEDGE TRIMMER
HEDGE TRIMMER MODEL HT255

INSERTING AND RELEASING

THE BATTERY PACK

Only use the OREGON® brand battery packs specified in these operating instructions.

Align the groove in the battery with the rails inside the battery port. Firmly insert the battery pack into the hedge trimmer’s battery port, pressing forward until it clicks as it locks into place (Fig. 10).

FIG. 10

To remove the battery pack, lift up on the battery release and remove the pack (Fig. 11).

FIG. 11

GENERAL OPERATION

WARNING: ALWAYS WEAR PROPER GLOVES AND EYE PROTECTION.

OPERATING TEMPERATURE

This hedge trimmer is designed to operate within a temperature range of 0°C to 40°C (32°F to 104°F).

GRIP

Always grip the tool with both hands. For right-handed operation, place the hedge trimmer on a firm, flat surface, grasp the front handle with the left hand and the rear handle with the right. Wrap fingers over the top of the front handle with the thumb below (Fig. 12).

FIG. 12

RIGHT-HANDED GRIP

For left-handed operation, grasp the front handle with the right hand and the rear handle with the left (Fig. 13).

FIG. 13

LEFT-HANDED GRIP

AD 0213 - F/N 558936 17