OREGON® CORDLESS TOOL SYSTEM

 

 

OPERATING THE HEDGE TRIMMER

 

 

 

 

HEDGE TRIMMER MODEL HT255

 

 

 

 

 

 

 

STANCE

Stand with both feet on solid ground, with weight evenly spread between them.

Do not overreach and do not stand on a ladder, stepstool, or any raised position that is not fully secured.

Hold the hedge trimmer as close as possible to the body to maintain control (Fig. 14).

FIG. 14

STOPPING THE HEDGE TRIMMER

Release the throttle trigger to stop the hedge trimmer.

STARTING THE HEDGE TRIMMER

Grasp the front and rear handles firmly. Pull back on trigger lock-out (1) with thumb (Fig. 15). Squeeze the throttle trigger (2) until the cutting blades move at the desired speed. The front handle switch (3) is a safety feature; the hedge trimmer will not start unless it is activated.

FIG. 15

(3) FRONT HANDLE SWITCH

(2) THROTTLE TRIGGER

(1) TRIGGER

LOCK-OUT

CONTROLLING CUTTING BLADE SPEED

The throttle trigger controls the speed at which the cutting blades oscillate. Squeeze the throttle trigger more firmly for faster cutting speed.

Use the lowest pressure required to cut the material. This helps to maximize the amount of cutting time per battery charge and reduces the number of charging operations required.

18

AD 0213 - F/N 558936

Page 18
Image 18
Oregon HT255 Stance, Stopping the Hedge Trimmer, Starting the Hedge Trimmer, Controlling Cutting Blade Speed