Stow CMS-94S Concrete Mixer Maintenance Engine

STOW CMS-94S CONCRETE MIXER — MAINTENANCE (ENGINE)

Maintenance

Perform the scheduled maintenance procedures as defined by Table 6 and below:

DAILY

■Thoroughly remove dirt and oil from the engine and control area.Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. Check the gearbox for oil leaks. Repair or replace as needed.

WEEKLY

■Remove the fuel filter cap and clean the inside of the fuel tank.

■Remove or clean the filter at the bottom of the tank.

■Remove and clean the spark plug (Figure 24), then adjust the spark gap to 0.024 ~0.028 inch (0.6~0.7 mm).This unit has electronic ignition, which requires no adjustments.

DANGER :

DO NOT use gasoline as a cleaning solvent, because that would create a risk of fire or explosion.

ENGINE AIR CLEANER

1.Remove the air cleaner cover and foam filter element as shown in Figure 26.

2.Tap the paper filter element (Figure 34) several times on a hard surface to remove dirt, or blow compressed air [not exceeding 30 psi (207 kPa, 2.1 kgf/cm2)] through the filter elementfromtheaircleanercaseside.NEVER brushoffdirt. Brushingwillforcedirtintothefibers.Replacethepaperfilter element if it is excessively dirty.

3.Clean foam element in warm, soapy water or nonflammable solvent. Rinse and dry thoroughly. Dip the element in clean engineoilandcompletelysqueezeouttheexcessoilfromthe element before installing.

Figure 24. Spark Plug Gap

ENGINE OIL

1.Drain the engine oil when the oil is warm as shown in Figure 25.

2.Remove the oil drain bolt and sealing washer and allow the oil to drain into a suitable container.

3.Replace engine oil with recommended type oil as listed in Table 7. For engine oil capacity, see Table 2 (engine specifications). DO NOT overfill.

4.Install drain bolt with sealing washer and tighten se- curely.

Figure 26. Engine Air Cleaner

Figure 25. Engine Oil (Draining)

STOW CMS-94SCONCRETE MIXERS — PARTS & OPERATION MANUAL — REV. #2 (08/04/06) — PAGE 25

CMS-94S specifications

The Multiquip CMS-94S is a remarkable piece of machinery in the realm of concrete mixing, designed to meet the demands of both professional contractors and DIY enthusiasts. With its robust design and advanced features, this concrete mixer is indispensable for a variety of construction projects.

One of the standout features of the CMS-94S is its powerful engine. It is equipped with a reliable Honda GX240 engine that delivers outstanding performance and efficiency. This 8 HP engine ensures that the mixer operates smoothly, even under heavy loads, making it ideal for large-scale projects where time is of the essence.

Durability is a key characteristic of the Multiquip CMS-94S. The drum is constructed from high-quality steel, which not only extends its lifespan but also allows it to withstand the rigors of demanding job sites. The mixer has a capacity of 9 cubic feet, allowing users to mix a significant amount of concrete in one go. This feature greatly enhances productivity, reducing the number of batches needed for larger jobs.

The design of the CMS-94S also prioritizes user convenience and safety. It features a tipping mechanism that provides easy dumping of mixed concrete, ensuring minimal waste and easy cleanup. The ergonomically designed handles allow for a comfortable grip, making it easier to maneuver the mixer even on uneven terrain.

In terms of technology, the CMS-94S incorporates a belt-driven mixer, which is less prone to wear and tear compared to direct-drive systems. This technology ensures quieter operation, lower maintenance needs, and improved overall reliability.

Safety is also a top priority in the design of the CMS-94S. The mixer includes protective guards and safety interlocks that help prevent accidents during operation. This not only protects the operator but also ensures that the machine remains in optimal condition.

Additionally, the Multiquip CMS-94S is designed for easy transportation. It comes with large wheels that facilitate movement across construction sites without hassle, allowing for quick repositioning as work progresses.

In summary, the Multiquip CMS-94S embodies the ideal blend of power, efficiency, and durability. With its advanced features, reliable engine, and safety mechanisms, it stands out as a trusted choice for concrete mixing needs, catering to professionals and DIY projects alike.